Author Topic: Razor X in Slim By LordNico.. (Read 103992 times)

SYSTEM aka (Cyberpyrot) · « **on:** March 30, 2008, 02:04:45 PM »

Hey all, here is L0rdNic0's PSP Slim with Dual Nubs. The wiring to the header pins is a little hard, but the over all installation is cake. The RazorX adds smooth operation since there are no bubbles of solder or wires to interfere with the spring. We here at AcidMods will be working on a no hassel way of installing the RazorX in the Slim that will include a relocation of the power switch to the Start button using a digital switch as posted in one of my other videos. Keep an eye out. NOTE: This install is 100% fully functioning without any issues.

here is a video of it in action..

Here is a sneek peek of the inside of the slim with the razor X in place.

Here is the Razor X with the face plate on..

anthonyta · « **Reply #1 on:** March 30, 2008, 02:15:25 PM »

clllleeeeaaannnnn omggg im jealous. i dont like the spring though i always end up bending it. check out my balloon one in the dual nub section =]

Nemesis · « **Reply #2 on:** March 30, 2008, 02:57:11 PM »

awesome, did the charging port have to be removed?

l0rdnic0 · « **Reply #3 on:** March 30, 2008, 03:07:19 PM »

Special thanks to Cyber for editing my video footage for me. Hope you guys like the Video and sorry that my PSP trim looks shabby I use that PSP everyday as an MP3 player and TV

Details, yes the Charging port needs to be removed and the power board too. At the time of this video recording, I had not installed the electronic switch, but now to turn the PSP on and off you need to hold the start button down for five seconds. Ten seconds to hard boot it, or use a magnet (love the security mod). Some time ago I had done the USB Mod so I didn't have to use Sony's charging method (this was before DAX created a Hack in CFW). Anyway now I can charge my slim even when its powered off so I guess it works out.. BTW the spring is easy to work with, just takes practice.

MattZani · « **Reply #4 on:** March 30, 2008, 04:10:07 PM »

Ghost in the shell...

Same game the A2D was shown on...

Ahh... Memories.

Anyway, this looks amazing, once you do a ribbon cable version i'll buy.

noah03ark · « **Reply #5 on:** March 30, 2008, 07:21:22 PM »

holy crap that is aweosme! wonderful work!!!!

theres a psp phat ribbon cable in the works too...right?

l0rdnic0 · « **Reply #6 on:** March 30, 2008, 07:41:27 PM »

no, no need for a Phat the contact points are easy to solder to. The PSP Slim is a different story but we dont want to give away to many details just yet.

Skullmaster · « **Reply #7 on:** March 30, 2008, 08:13:18 PM »

Cool! I cant wait for a kit, I dont trust my skills that much to do it on my own :p

Electro · « **Reply #8 on:** March 30, 2008, 08:42:44 PM »

Nice, good work the installations looks nice and clean.

2 bad I don't wanna mod my Slim
But as for my Fat PSP I might have to do something like this again.

nez · « **Reply #9 on:** March 30, 2008, 11:06:06 PM »

very clean as normal. i like it a lot but i will wait to see what is to come with the parst taken out. and the PCB Part.

anthonyta · « **Reply #10 on:** March 31, 2008, 12:22:39 AM »

hey what did you use for the spring cage? it doesn't look like the psp phat's analogue. its a perfect circle

Siggen · « **Reply #11 on:** March 31, 2008, 02:02:05 AM »

cool, will you sell this mod later? cos i would do it my self on the phat and all, but i dont even want to open my slim (my precious). Or maybe someone (hobby) professionals in england rather (since i live in norway). I thought i never would want to mod my slim, but you changed my mind Nico

but since the mod is not really ready for the public yet suits me okay, cos living on my own is hard enough, need to save up some moneys

Luke · « **Reply #12 on:** March 31, 2008, 04:38:50 AM »

can i steal this kids brain so im as smart as him xD

DubbleDutch · « **Reply #13 on:** March 31, 2008, 06:07:02 AM »

nice l0rdnic0 very nice!!!!!

ccccpie · « **Reply #14 on:** March 31, 2008, 01:55:19 PM »

Quote from: luke101a on March 31, 2008, 04:38:50 AM

can i steal this kids brain so im as smart as him

He isnt exactly a kid :p

General Vergel · « **Reply #15 on:** April 01, 2008, 08:36:37 AM »

omg so awesome

JoblessPunk · « **Reply #16 on:** April 02, 2008, 07:50:57 AM »

dude!
thats sooo freakin cool!

I have a question,
On your site to buy it:
http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425

is that the kit for the PSP Slim?
and does that "kit" come with everything you will need + instructions?

Thanks!
JoblessPunk

drchronic · « **Reply #17 on:** April 03, 2008, 12:09:28 AM »

Truly amazing... how much do you think the kit will cost when you are getting the pcb manufactured? When this comes out it will make me finally fork over some $$$ for a slim. KUDOS!!!!!

robin1989 · « **Reply #18 on:** April 03, 2008, 03:24:33 AM »

Quote from: drchronic on April 03, 2008, 12:09:28 AM

Truly amazing... how much do you think the kit will cost when you are getting the pcb manufactured? When this comes out it will make me finally fork over some $$$ for a slim. KUDOS!!!!!

the actual razor x board is already released at www.coomods.co.uk were just waiting on creating a tutorial for people if they need it

MattZani · « **Reply #19 on:** April 03, 2008, 05:04:04 AM »

Quote from: JoblessPunk on April 02, 2008, 07:50:57 AM

dude!
thats sooo freakin cool!

I have a question,
On your site to buy it:
http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425

is that the kit for the PSP Slim?
and does that "kit" come with everything you will need + instructions?

Thanks!
JoblessPunk

That is just a board, you will need a Analog Nub from a PSP, Kynar, Solder, Dremel, Etc. and a tut to be released.

JoblessPunk · « **Reply #20 on:** April 03, 2008, 02:36:28 PM »

Quote from: MattZani on April 03, 2008, 05:04:04 AM

That is just a board, you will need a Analog Nub from a PSP, Kynar, Solder, Dremel, Etc. and a tut to be released.

Ty,
I can't wait till the tutorial is released.... just like everyone else thats seen that video! haha

drchronic · « **Reply #21 on:** April 03, 2008, 05:44:38 PM »

So does this have all I need (minus the tutorial)?? http://www.coolmods.co.uk/catalog/product_info.php?products_id=189

Skullmaster · « **Reply #22 on:** April 03, 2008, 07:08:59 PM »

no, will will need wire and other things. I suggest waiting for a tutorial, which will make this way easier

Ilzwalrus · « **Reply #23 on:** April 04, 2008, 09:43:42 AM »

One word: clean

JoblessPunk · « **Reply #24 on:** April 04, 2008, 04:37:00 PM »

does anyone know how the tutorial is going?

anthonyta · « **Reply #25 on:** April 04, 2008, 11:33:58 PM »

im still wondering is that the slims analog top? its a perfect circle unlike the fats

S.T.R. · « **Reply #26 on:** April 05, 2008, 04:02:52 PM »

Ou man you are so god. I wait of a TUT.

vgamer360 · « **Reply #27 on:** April 08, 2008, 06:44:53 AM »

I don't know if you guys knew this but looks like he got his story while back on Engadget.
http://www.engadget.com/2008/03/30/psp-slim-modded-for-dual-analog-sticks/

DubbleDutch · « **Reply #28 on:** April 08, 2008, 07:56:21 AM »

Quote from: vgamer360 on April 08, 2008, 06:44:53 AM

I don't know if you guys knew this but looks like he got his story while back on Engadget.
http://www.engadget.com/2008/03/30/psp-slim-modded-for-dual-analog-sticks/

https://www.acidmods.com/forum/index.php?topic=17058.0

vgamer360 · « **Reply #29 on:** April 08, 2008, 08:10:33 AM »

Quote from: DubbleDutch on April 08, 2008, 07:56:21 AM

https://www.acidmods.com/forum/index.php?topic=17058.0

Ok, I guess you guys did know. =/

News:

Author Topic: Razor X in Slim By LordNico.. (Read 103992 times)

ccccpie