« previous next »
Pages: [1]   Go Down

Author Topic: need new solder points.....  (Read 3277 times)

Offline viperfan91

  • Motor Mouth
  • *
  • Posts: 82
  • Post quality +0/-0
  • Gender: Male
    • WindowtotheMagic
need new solder points.....
« on: December 12, 2007, 05:08:46 PM »
can somebody point out some good palces to solder the + & - wires for the LEDs please. And if possible can you draw it on this pic or someother pic of a mobo:

Logged
"What weighs six ounces, sits in a tree, and is very dangerous?"
"I don't know what?"
"A sparrow with a machine gun."
"Yes, of course."

Offline xxchrisxx555

  • Chief squatting Hard
  • *
  • Posts: 24
  • Post quality +0/-0
Re: need new solder points.....
« Reply #1 on: December 12, 2007, 06:16:57 PM »


its a 5 volt point so u well probably need a higher resistor

i have 2 10 ohms in a series
Logged

Offline TR4G-

  • Millennium Poster
  • *
  • Posts: 1386
  • Post quality +0/-0
  • Gender: Male

Re: need new solder points.....
« Reply #2 on: December 12, 2007, 07:36:28 PM »
or the classic trigger mod one

Logged

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: need new solder points.....
« Reply #3 on: December 12, 2007, 08:02:55 PM »
Quote from: viperfan91 on December 12, 2007, 05:08:46 PM
can somebody point out some good palces to solder the + & - wires for the LEDs please. And if possible can you draw it on this pic or someother pic of a mobo:

Hey, I'm not trying to be mean or anything like that, but the information you were looking for can be found in the LED tut or with the search button.  :tup:
Logged


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

Offline viperfan91

  • Motor Mouth
  • *
  • Posts: 82
  • Post quality +0/-0
  • Gender: Male
    • WindowtotheMagic
Re: need new solder points.....
« Reply #4 on: December 13, 2007, 05:14:24 PM »
i broke the connector for the power board so it doesnt get power for the LEDs anymore. so thats why i need a mother board solder point. Thanx for the responses guys.
Logged
"What weighs six ounces, sits in a tree, and is very dangerous?"
"I don't know what?"
"A sparrow with a machine gun."
"Yes, of course."

Offline Azie139

  • Bomb Maker
  • *
  • Posts: 296
  • Post quality +0/-0
  • Gender: Male
    • Myspace.com/Azie139
Re: need new solder points.....
« Reply #5 on: December 13, 2007, 05:50:58 PM »
bridge it run a wire from the 3.6v spot on the mobo by the white clip from the charging cable to the pcb should fix it
Logged

Offline viperfan91

  • Motor Mouth
  • *
  • Posts: 82
  • Post quality +0/-0
  • Gender: Male
    • WindowtotheMagic
Re: need new solder points.....
« Reply #6 on: December 13, 2007, 08:33:54 PM »
I am more of visual person. Anyway you could provide some pics. If I can't see it I will be here forever trying to figure it out.
Logged
"What weighs six ounces, sits in a tree, and is very dangerous?"
"I don't know what?"
"A sparrow with a machine gun."
"Yes, of course."
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal