HELP please

[dawud]

HI im new here buy not modding
ive done some mods like usb and re-routed the power button

im going to add around 15-20 leds into my psp
please can i have soom help with this
i would like to use a switch in the battery compartment
im using 0603 smt leds blue
what resistors would i need
where do i solder to
how many leds can the power board take up to??

thanks for you time

[FreeK]

you dont have to have a seperate switch... you could just wirte it to your hold switch for lighting power... i havent done any psp mods yet either so i just use what i hear from other people and maybe use the search button to find more info on this if no1 else here tells you

[crazyl69]

          Welcome to acidmods...First, is your choice if you want to put a slide micro switch in the battery compartment but you don't have to. Use the hold switch to light  up the led's. Use a 10 ohm resistor and your voltage supply most likely be by the left white bottom mobo speaker connector. There are two small solder points. Left(-),right(+).

[Slimby]

Challenge accepted.

Slimby

[PSPotential]

I'm working on 8... And I'm A Noob. Give him some encouragement, although it may be impossible, it's good to have big aspirations. they just need to be realistic...