Author Topic: where to wire leds when using this plugin...  (Read 9018 times)

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
where to wire leds when using this plugin...
« on: January 13, 2008, 09:06:25 AM »
Where do i wire leds when using this plugin        http://dl.qj.net/index.php?pg=12&fid=13538&catid=151
...?

I will use 0603 blue leds.
« Last Edit: January 13, 2008, 09:23:43 AM by Dazzerr-- »

Offline blackburn

  • Acid Modder
  • *
  • Posts: 915
  • Post quality +0/-0
  • Gender: Male
  • Xbox 360 Enthusiast and JTAGer
Re: where to wire leds when using a plugin...
« Reply #1 on: January 13, 2008, 09:19:41 AM »
i would test this with a meter, but it seems like it run from the point on the outside (far left and far right), standard USB ports ground and positive connection are the points on the outside edges


All Sigs Made by ME!

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
Re: where to wire leds when using a plugin...
« Reply #2 on: January 13, 2008, 09:21:11 AM »
what??

Offline odilio

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #3 on: January 13, 2008, 09:29:58 AM »
On what Firmware can i put it on ( i have 3.71 M33)

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #4 on: January 13, 2008, 09:34:57 AM »
yeah you can put it on that.
But where am i supposed to solder the leds?

Offline odilio

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #5 on: January 13, 2008, 10:16:47 AM »
On the 2 point where the orange colored pins from the Chotto chot cam contact with the psp

Offline odilio

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #6 on: January 13, 2008, 10:29:43 AM »
I tried the plugin but i get an error it says something like the ERROR Connecting USB-GPS ( some numbers )

I put it in module cause i have no nodule folder  :help:

Offline tibor28

  • Who Farted ???
  • *
  • Posts: 222
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #7 on: January 13, 2008, 10:42:50 AM »
it would be nice is someone could make a picture showing where to connect the leds coz i am also interested in this plugin

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #8 on: January 14, 2008, 07:25:02 AM »
Quote
On the 2 point where the orange colored pins from the Chotto chot cam contact with the psp

Where is that?

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: where to wire leds when using this plugin...
« Reply #9 on: January 14, 2008, 07:29:21 AM »
Where is that?

on top of the psp doh

it is on the left and the right of the female usb port



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline kairu67

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #10 on: January 14, 2008, 08:16:54 AM »
http://pinouts.ru/Slots/USB_pinout.shtml

and also, will this mod work with usb charge? how do i need to wire it to use usb charge?

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: where to wire leds when using this plugin...
« Reply #11 on: January 14, 2008, 08:21:27 AM »
,..................

look at the top of your psp

u'll see the female usb ports
on the LEFT and the RIGHT of the usb ports are holes
these 2 holes are the ones that are used for the plugin, go!cam, chotto shot, mic, etc...



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline kairu67

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #12 on: January 14, 2008, 08:33:33 AM »
ooh, they are the contact pads on the top that you solder to.. i thought you soldered directly to the mini usb female port, on the +5 and ground. so this would work with usb charge... ill meter it before i install them, but it and usb charge should work i think

Offline tibor28

  • Who Farted ???
  • *
  • Posts: 222
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #13 on: January 14, 2008, 09:00:45 AM »
,..................

look at the top of your psp

u'll see the female usb ports
on the LEFT and the RIGHT of the usb ports are holes
these 2 holes are the ones that are used for the plugin, go!cam, chotto shot, mic, etc...
those holes are just for screws!! there is no current or anything passing through them

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #14 on: January 14, 2008, 10:12:37 AM »
He isnt on about the holes.

Right beside the female USB port there are 2 orange things. you cant miss them.  :whoosh:

Offline tibor28

  • Who Farted ???
  • *
  • Posts: 222
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #15 on: January 14, 2008, 11:46:34 AM »
He isnt on about the holes.

Right beside the female USB port there are 2 orange things. you cant miss them.  :whoosh:

the ones in red or green squares? how much does it output? 3.6 or 5V?

Offline kairu67

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #16 on: January 15, 2008, 08:16:19 AM »
i am pretty sure its the red ones

when you solder your leds there would you mind trying to see if this plugin works with usb charge? it would be greatly appreciated

if you do please email me at
kylesoldname92 (at) gmail (dot) com

and i am pretty sure it is 5v

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #17 on: January 15, 2008, 08:27:25 AM »
when your psp is in one peice. RIGHT BESIDE the usb of the PSP is 2 orange things!! and i think its 5v...

Quote
I tried the plugin but i get an error it says something like the ERROR Connecting USB-GPS ( some numbers )

I put it in module cause i have no nodule folder 

What firmware are you on.

i advise you change the name of the plugin to 'lftv_plugin.prx' .
^^this may work just go on the XMB icon 'location free player'

By the way it MUST go in nodule NOT module :)
« Last Edit: January 15, 2008, 08:30:51 AM by Dazzerr-- »

Offline kairu67

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #18 on: January 15, 2008, 08:50:21 AM »
has anyone tested this yet on 3.80 m33?

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: where to wire leds when using this plugin...
« Reply #19 on: January 15, 2008, 09:04:36 AM »
those holes are just for screws!! there is no current or anything passing through them

if i meant the screw holes i'd said that,..

do i look so stupid to think the current will flow thrue the screws ??



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline tibor28

  • Who Farted ???
  • *
  • Posts: 222
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #20 on: January 15, 2008, 09:06:00 AM »
if i meant the screw holes i'd said that,..

do i look so stupid to think the current will flow thrue the screws ??
i never saw u (joke) :winker:

Offline odilio

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #21 on: January 15, 2008, 10:00:21 AM »
has anyone tested this yet on 3.80 m33?
I dit but i get the same messsage ( and re placed lftv_plugin.prx with the plugin in Flash0) The message syas: Error activating USB GPS (0x8005) thats exact wat is says and no light i put on a led the correct way i tested it with the oran ge holes olmost the usb port so close are they

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #22 on: January 15, 2008, 11:09:01 AM »
rite, im gonna try the plugin as soon as i get my psp case. odilio can you show a pic of what you have done?

there is no nodule directory for 3.80 M33.
do you have one?

also try renaming it to premo_plugin.prx . this will replace the XMB icon remote play
« Last Edit: January 15, 2008, 11:31:53 AM by Dazzerr-- »

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: where to wire leds when using this plugin...
« Reply #23 on: January 15, 2008, 03:12:05 PM »
oh so this cant work on 3.80m33? too bad
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: where to wire leds when using this plugin...
« Reply #24 on: January 16, 2008, 07:33:24 AM »
the system maps are hidden in the flash0 ;)

just type the address in the bar ;)

x:/vsh/nodule etc......... (dont know if that line is correct but you just need to type that and x is the drive where the psp is connected so it may be different)



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #25 on: January 16, 2008, 08:55:14 AM »
i got it. Thanks.
Your way didnt work lol. i had to go on tools/folder options/view and then click show system files.
oh well, your help is appreciated :)

so has anybody succesfully done this yet?.

hopefully my psp case is here tonight and i can try :)

I have just put the plugin on my psp and it says Error activationg usb gps (0x8005)
(i have no leds connected to my PSP though. i just decided to put the plugin in lol
« Last Edit: January 16, 2008, 11:03:49 AM by Dazzerr-- »

Offline odilio

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #26 on: January 16, 2008, 12:53:06 PM »
rite, im gonna try the plugin as soon as i get my psp case. odilio can you show a pic of what you have done?

there is no nodule directory for 3.80 M33.
do you have one?

also try renaming it to premo_plugin.prx . this will replace the XMB icon remote play
I type in the adress bar X/Flash0/vsh/nodule or module and i came in the map no/module so i named it lftv_plugine cause i dont use location free and a want remote play to work cause i have a ps3 so i dont know if its work on the later firmwarei think we maybe can usa the plugin as a plugine in the seplugins map or en an OE firmware that wat i think

Offline kairu67

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #27 on: January 16, 2008, 06:33:16 PM »
did not work for me on 3.80m33-4
i got error
activating usb gps 0x8005

did they change the hex value of the gps/power thing? would we be able to change it with hexedit if we found where it is now?

i do NOT think its my psp, ive tried it on many different plugins..... idk maybe someone else has had success

if not, back to 3.52 for me :)

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
Re: where to wire leds when using this plugin...
« Reply #28 on: January 17, 2008, 11:54:14 AM »
Quote
I type in the adress bar X/Flash0/vsh/nodule or module and i came in the map no/module so i named it lftv_plugine cause i dont use location free and a want remote play to work cause i have a ps3 so i dont know if its work on the later firmwarei think we maybe can usa the plugin as a plugine in the seplugins map or en an OE firmware that wat i think

Just go to tools/folder options/view and then click 'show operating system files' (something like that) there is a module but no nodule



I think you might have to solder it in a different location... ??
doubt it but does this give any information?

PIN#
  

SIGNAL
  

PIN# SIGNAL
1   +5  
2   -DATA  
3   +DATA  
4   NC   
5   GND

 

Pin 1 and pin 5.
« Last Edit: January 17, 2008, 12:58:29 PM by Dazzerr-- »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal