Console Modding------ ( Here you can talk about your favorite Consoles ) > Tutorials

Wiimote and Nunchuck Mod Tutorial by Tmandt

(1/4) > >>

pinoyballa:
WIIMOTE AND NUNCHUCK MOD TUTORIAL BY TMANDT


Introduction
Ok I decided to make a tutorial on how to mod your wiimote and nunchuck so they can light up. :buttrock: Sorry if you think this tutorial is long. Tell me what you think of my tutorial ;D Ok lets get started. Sorry for the big pics ;)


Parts Needed

* Wiimote
* Nunchuck
* Solder
* 3mm Blue Led

Tools Needed

* Soldering Iron
* Tri-Wing Screwdriver
* Phillips Screwdriver Set
* Cup Cake Mat :buttrock: rofl
 
Step By Step Tutorial
1- First you get your wiimote, nunchuck, soldering iron, solder, etc...
                 
                 
                 
2- Now you take your tri-wing screwdriver and you take your nunchuck apart like so.
                 
                 
3- You take your 3mm led and you solder to these points on the nunchuck board like so.
                 
4- Now your nunchuck should look like this.
                 
5- You plug your nunchuck to your wiimote and see if it works, if so put everything back together like this.
                 
                 
                 
                 
And there you go your modded nunchuck now on to the wiimote
6- You get your wiimote and take it apart like so
                 
                 
Be careful on this part take your phillips flathead and pry your wiimote cover off but dont break it
                 
                 
7- Now you take the board out of th casing and flip it over
                 
8- You solder your 3mm led to these points
                 
9- Now bend your led over to the other side and position it like so
                 
10- Pop your batteries back in and see if it works. im my case it does
                 
                 
                 
11- If it works put your wiimote back together
                 
                 
                 

CONGRATS! :buttrock: YOU JUST FINISHED YOUR WIIMOTE AND NUNCHUCK MOD! HERE IS THE FINAL PRODUCT!
                 
                 
                 

Plz Leave +Karma Or Gold If You Used My Tutorial Thank You! ;D

AzNsquirl:
hey dude would you do the same thing for the B butten on the wiimote? like just add another 3mm led so but position it diffirently and so in total there is 4 wires on the  negative and positive? I saw another tut where he soldered the B buttens and A buttens to different areas.

Jumbo:
Just to tell you guys it is Tmandt not   Tmandit LOL

Tri-edge:

--- Quote from: gotjumbo911 on June 15, 2008, 06:47:15 PM ---Just to tell you guys it is Tmandt not   Tmandit LOL

--- End quote ---
oops, thanks for the heads up

draculamunky:
Hey, I have a question.

I was messing around with an LED ring light, i took it apart and thought that maybe you can connect the chip with the LED and switch to the inside of the wiimote. Then maybe cut a whole on like the side of the wiimote so that the switch cant stick out. Thus enabling the LED to turn on/off. Would it work?

Heres the LED ring light I'm talking about.



When I get my hands on a soldering gun, I'm going to attempt it.

Navigation

[0] Message Index

[#] Next page