Author Topic: Problem with LED pulse Mod maybe short circuit ? (Read 10961 times)

phoenix3200 · « **on:** January 16, 2008, 03:52:14 AM »

hello
I made the Blue Trigger LED pulse Mod on my psp and I success

but since I closed my psp, I have probably make an electrical short circuit
and when I start my psp the green LED of power lights one second
and switch off

and my psp doesnt start

can you have some idea to repair my psp ?
or I must change the mother board ?

ryan0 · « **Reply #1 on:** January 16, 2008, 01:09:45 PM »

power fuse is blown,ask the guys where it is i aint too god with psp's,just ps2's and xbox's

tibor28 · « **Reply #2 on:** January 16, 2008, 02:38:20 PM »

here is the power fuse

try to bridge it, good luck

Azie139 · « **Reply #3 on:** January 16, 2008, 08:39:02 PM »

it may be just a short check ur wiring

psp339 · « **Reply #4 on:** January 16, 2008, 08:54:27 PM »

I just did this mod yesterday from 4:30 to around 12:00. It took me forever to fix all the shorts. Wrap the LM386 chip in electric tape. Put electric tape over all the wires showing. Make sure the wire isnt touching the LCD cage and metal thing under motherboard and make sure u soldered everthing correctly and check if any wires disconnected by itself.

phoenix3200 · « **Reply #5 on:** January 17, 2008, 09:06:43 AM »

I have tested all my fuse : power, usb, LCD and they are not blown

so I think I must change my motherboard

*FuFa · « **Reply #6 on:** January 17, 2008, 09:09:12 AM »

Quote from: phoenix3200 on January 17, 2008, 09:06:43 AM

I have tested all my fuse : power, usb, LCD and they are not blown

so I think I must change my motherboard

No, make sure none of the wires are exposed, isolate your speakers (srsly, happened for me that one of them shorted when the LCD cage was on) and make sure there isn't too much pressure on the wires. Also insert your Battery, and get really close to your PSP, if you hear a clicking noise, it's a short.

phoenix3200 · « **Reply #7 on:** January 17, 2008, 09:14:11 AM »

I have disconnected my mod

and I have connected the motherboard, the powerboard and the batery
and when I start my psp the green LED of power lights one second
and switch off

ryan0 · « **Reply #8 on:** January 20, 2008, 03:43:23 PM »

theres still a short somewhere..or ur power fuse is blown,one or the other man i know u tested it but test it again

psp339 · « **Reply #9 on:** January 20, 2008, 03:56:11 PM »

I have same problem. After removing my mod, the green light flashes once then psp shuts off. The power fuse might be blown but where is it???

tibor28 · « **Reply #10 on:** January 20, 2008, 05:06:23 PM »

Quote from: psp339 on January 20, 2008, 03:56:11 PM

I have same problem. After removing my mod, the green light flashes once then psp shuts off. The power fuse might be blown but where is it???

look few posts back i already sent a pic

psp339 · « **Reply #11 on:** January 20, 2008, 05:15:58 PM »

i dont see a pic.

phoenix3200 · « **Reply #12 on:** January 21, 2008, 10:55:48 AM »

i think pic has been removed

look this is the power fuse :

http://www.llamma.com/PSP/repair/images/PSP_fuse/Td-Fuse.jpg

but this week I will try it again but I am sure it is not blown

ra1n · « **Reply #13 on:** January 21, 2008, 11:01:04 AM »

Quote from: phoenix3200 on January 21, 2008, 10:55:48 AM

i think pic has been removed

look this is the power fuse :

http://www.llamma.com/PSP/repair/images/PSP_fuse/Td-Fuse.jpg

but this week I will try it again but I am sure it is not blown

budgray19 · « **Reply #14 on:** January 21, 2008, 11:05:08 AM »

well my 2 cents is to solder off teh fuse and just put a nice glop of solder on it and if it dosnt work then its something else
i did the smae with my lcd backlight
lol but thats what i would do

phoenix3200 · « **Reply #15 on:** January 21, 2008, 01:35:49 PM »

I tried it again and I am sure it is not blown !

do you have an other idea ?

phoenix3200 · « **Reply #16 on:** January 23, 2008, 10:37:31 AM »

What should I do?

lookkool3 · « **Reply #17 on:** February 20, 2008, 09:24:47 AM »

where did you get the mod parts from?

cwn723 · « **Reply #18 on:** February 20, 2008, 08:44:43 PM »

was there any smoke? if not, i dont think its short.

i22foosh · « **Reply #19 on:** February 20, 2008, 10:19:56 PM »

How do you bright a fuse? And what does bridging it mean/do

ryan0 · « **Reply #20 on:** February 21, 2008, 05:15:58 AM »

Quote from: cwn723 on February 20, 2008, 08:44:43 PM

was there any smoke? if not, i dont think its short.

smoke comes from the lm386 if any wires or pins cross but the same goes for if you bridge a fuse then any wires cross,which is not a good thing........it may look cool but its not a sight worth 100$
and i22foosh you are really starting to get on ppls nerves with ur constant stupid spamming,check the wiki and shutup,it was also explained twice in this thread,stop spamming or you will get banned

phoenix3200 · « **Reply #21 on:** July 04, 2008, 07:53:19 AM »

I get the MOD from http://www.pspgen.com/modules.php?name=News&file=article&sid=3990
i have not seen smoke

rceckspurt13 · « **Reply #22 on:** July 04, 2008, 12:51:38 PM »

so it still dosent work even after you removed the mod? Closing the psp likely put pressure on somthing and caused the short. I would try getting a new powerboard first. They are much cheaper then motherboards and if it still dosent work then you have an xtra powerboard.

phoenix3200 · « **Reply #23 on:** July 05, 2008, 12:30:23 AM »

it still doesnt work even after I removed the mod
and i dont want to buy an other motherboard

because I have bought an other psp and i succes install the mod and succes close psp and i is very fine

but i want to repair my first psp if it is possible ...

RyanF · « **Reply #24 on:** September 30, 2009, 03:58:18 PM »

you could have static-zapped the CPU. if this happened, you will need to get a new mobo, but you most likely shocked one of the smaller, cheaper parts that the power goes through.

DarkShot · « **Reply #25 on:** September 30, 2009, 05:59:23 PM »

lord

mega necro bump

Dude, you're new so it's okay this time, and welcome to Acidmods.

One of our rules it that you don't bump old topics. This thread is over a year old.

phoenix3200 · « **Reply #26 on:** October 01, 2009, 12:29:27 AM »

thank you anyway for the answer RyanF

Post Merge: October 03, 2009, 09:37:12 AM

I manage to solve my problem !

I answer to help people who have same problem as me to solve it :
I have short-circuited this component (I have TA 086) :

http://img210.imageshack.us/img210/4876/pspv.jpg
Now it works !

News:

Author Topic: Problem with LED pulse Mod maybe short circuit ? (Read 10961 times)