Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Guys.... this mod has been obsolete since the introduction of the photofast CR-3100 and CR-5400 in cost and upgrade ability. Stop wasting your time in buying cheap azz card readers and duo adapters that still wont have the performance of the photofast products. By the time you pay for all your parts/shipping handling you will exceed the cost of the CR-5400 or worse yet, fry your PSP..!if you want to internalize the CR-3100 then read this thread... http://www.pspmod.com/forums/hardware/40368-internalizing-my-photofast-cr-3100-a.htmlIt is very easy to do and no soldering required..! If you are still scared about opening up your PSP then purchase the CR-5400. 8gig are the biggest in the microsd form factor so you are limited to a max of 16gigs compared to 32gig with the CR-3100 mod. 16gig MicroSD cards will hit the market with in a couple more weeks.THe CR-3100 sells for $48 USD and the CR-5400 sells for $25 USD..You can buy them at shopdigi.com-peace!
I did do my research and that is exactly why i posted that comment:This mod shows that you can use an SD(HC) card on your PSP by using an microsd-produo adapter.The video shows the same thing being done without a converter, but just a cut op produo card.They didnt show SDHC cards though, probably because they didnt exist yet when the video was made:PSo my question was: "wouldnt this also work?" (as in: wouldnt this also make it possible for you to use sdhc cards on your psp.)And so what if this has been asked before, you expect everyone who has a question regarding the first post to first read the entire thread before asking?What if this was a 40-page thread, you expect every person so first read through 40 pages because someone may have asked that question before?And as for posting in als old topic: the last post was also in september, so people arent allowed to post in a thread after a couple of weeks?And also my question was directed at this mod, this topic, why would I create a new thread if im am just goin to ask a question about THIS mod?but back to the point, So the mod decribed in the video would have the same results as this one discussed here and would also work with SDHC?
1st...Jumbo i hope you are not as stupid as your avatar looks because if you were to re-read my post i never said $48... I said exceeding the cost of the CR-5400 which sells for $25..2nd...i can tell someone wasn't paying attention in math class because by the time you buy, USB card reader, ribbon cable, duo adapter, solder gun, solder, electrical tape and shipping/handling perhaps gas if you have to go to Radio shack you would already exceed way beyond $10... 3rd... MicroSD current max size 8gig. 16gig Micro cards are on the way as i clearly stated... SDHC current largest size available is 32gig.. CR-5400 current mem capacity is 16gig with the potential to go 32gig with the use of 2\16gig micro SD cards once they are available.. CR-3100 currently can go 32gig with the potential to go as high 64gig once a firmware is supported. So hate all you want because anyone who has at least two brain cells working knows that using the single SD card mod will limit you to one card. CR-3100 can double that with out the need of any soldering or shorting out your psp. school is over...
first of all MR perfect you are wrong you are just bashing jumbo for no reason I sense you have some kind of dislike for each other but you are saying the original mod is obsolete because a newer component was released 2 weeks ago??? and all the rumors havent been cleared up now your process is obsolete because you dont need the CR3100 anymore it is obsolete to the new CR5100 witch is finaly release in its 64gb glory that can suppourt 2 32gb SDHC cards all by itself and PSP firmware is by no means limited to 64 gb as you stated It has been tested on a TB and it reads the device just fine I agree that it is way better with the potental for 64gb but no need to act all knowing this is all just theory you nor I knows for a fact these things even work as we have not taken one apart and tried ourselves there is very limited published info on the device and it is very contradictory what the info from different sources say. but yes the no solder method you stated will work and its great you know about it but you better buy up all those CR3100 because no more will be made and you will have to do the solder method to suppourt 2 SDHC cards instead of SDHC mini with the newest CR5400 once all the CR3100 are all gone and the CR3100 is caped at 32 gb and only the newest CR5400 suppourt 64gb
Holy cow your post is hard to read with out any punctuations.... I want to first start by apologizing to all as it wasn't my intension to get into an argument with your buddy Jumbo. I was just simply retaliating from the insults he replied to my thread. It was not the welcome i envisioned from my first post on a well know mod site as this or worse yet coming from a moderator.I recently purchased both CR-3100 and CR-5400 so if i come across as a know it all is because i have them and tested with them. I will be more than happy to answer any questions you all may have to the best of my knowledge. Please don't flame me because i'm trying to spread the word on how inexpensive and how well these products work. I'm also trying to keep poor 13year kids from potentially damaging their PSP when they no electrical experience what so ever to be doing mods like this.Being obsolete is a process that occurs on a daily basis in any industry. Every product that you see on shelf is already obsolete as manufactures are already working on patches, making it smaller, faster and more efficient. That is just the way the trend works.. There was nothing in either of my posts that was wrong. The fotofast products work right out of the box with out the need of soldering and they are really easy to internalize.btw.. thank you for letting me know that the PSP supports TB because i was under the impression with the current firmware it only supported 32gig.
no for the last time is dose not use the same protocalls an MS stick witch is used in the video you linked(and only card used in that video as its the only card that can directly connect without an adapter SD cards have been around wayyyyy longer than PSP.... ) to uses same protocalls as MSPD SDHC uses completely diffrent protocalls therefore you need an adapter or some kind of hardware to translate dont you think its there for a reason I mean come on if it was possible to just directly wire wouldnt you think we would be doing that in the first place?. No I do not expect you to read the whole thread maybe just skim trough it and search function? eyebrow and yes it was posted in recently but it is all just spam like your post from ppl who cant research and we have been asking to stop bumping it with useless unrelated or stupid comments.
Jumbish... for the love of god please stop posting...You just made yourself look like a punked bish on the internet by twisting everything i said.. HAHAHAHAHAHA... Please tell your mom to read my posts for you since you cant understand what i was trying to say.
wifi switch on the side, non-clear backplate, fat looking, speaker holes.
I tried to do this today. I soldered everything correctly according to the pin outs, by when i put the adapter in my psp and restart the memory stick will just continuously flash. when i try to format, the memory stick light will blink steady and it will say there is not a card in the psp. i have tried this with both sd and sdhc cards and still no luck. any suggestions would b greatly appreciated.
please let this thread die, stop bumping it people. Btw if that happens it means there is a problem in your wiring. Trust me this happened to mine, you may think your wiring is perfect but I got someone else to check it and they found my fault straight away.
Robin I r sorrieez.