super noob looking to do dual nub mod

[greendragonslim]

Well, i've been reading tuts and watching videos, but the videos are just people using the dual nubs and the tuts confuse me because I have no experience in hardmodding or soldering. I guess that the best thing for a dual nub is a razor, and I'm fairly certain that I have to either move the ac input or make the usb the charger(again, I've read tuts and watched videos but still makes no sense). I'm fairly smart and I'm sure if some one could give me the low down lol, I'd be able to do this. My father is very good at soldering and connecting wires and stuff, so when I visit him I'll probably have him help me. Also, What do I need to buy to do all of this? thanks and sorry if this has already been posted (i'm sure it has lol)     

[psp_nl]

First you need to do the Razor 2 dual nub mod. How to install/solder it: https://www.acidmods.com/forum/index.php?topic=12678.0
You will need: 1 Razor/Razor 2 board
                    2. kynar wire
                    3. analog stick unit

Then if you want to do USB charge mod: https://www.acidmods.com/forum/index.php?topic=12678.0

[Tri-edge]

you can get a extra powerboard online and practice soldering to that with the razor before hand and that way if you mess up you don't ruin your psp

[greendragonslim]

good thinking dude and If I do it correctly I could just replace it with the one currently in my psp right? thanks

[greendragonslim]

First you need to do the Razor 2 dual nub mod. How to install/solder it: https://www.acidmods.com/forum/index.php?topic=12678.0
You will need: 1 Razor/Razor 2 board
                    2. kynar wire
                    3. analog stick unit

Then if you want to do USB charge mod: https://www.acidmods.com/forum/index.php?topic=12678.0

Don't I have to do the usb mod in order to fit everything or can I leave the ac plug?

edit: supplies i will purchase
will this work for a new analog stick? http://cgi.ebay.com/Repair-Part-Analog-Joystick-Stick-Replacement-for-PSP_W0QQitemZ120213853434QQihZ002QQcategoryZ122516QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

kynar wire? http://cgi.ebay.com/Kynar-wire-30-awg-30-inches_W0QQitemZ320212043622QQihZ011QQcategoryZ49230QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

razors 2 I guess I will have to buy from some one on here... is that everything I need besides the soldering iron...

[Tri-edge]

Don't I have to do the usb mod in order to fit everything or can I leave the ac plug?

edit: supplies i will purchase
will this work for a new analog stick? http://cgi.ebay.com/Repair-Part-Analog-Joystick-Stick-Replacement-for-PSP_W0QQitemZ120213853434QQihZ002QQcategoryZ122516QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

kynar wire? http://cgi.ebay.com/Kynar-wire-30-awg-30-inches_W0QQitemZ320212043622QQihZ011QQcategoryZ49230QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

razors 2 I guess I will have to buy from some one on here... is that everything I need besides the soldering iron...

next time hyperlink your links
1. The nub is is okay
2. I don't know a thing about wire, but I THINK it's okay (I just my dad's when I need it)
3. you can buy a razor board for ndrew2505 https://www.acidmods.com/forum/index.php?topic=11851.0
and that should be it

[greendragonslim]

is there a better nub or different one that I should get, and I'm getting my kynar wire from radio shack along with a soldering iron...does anyone else sell the razor 2 boards because a few people were saying that it was expensive...

[Tri-edge]

no they are all the same nubs.  and as far as I know nobody else sells them. if you want to you can make your own, radioshack sells an etching kit that you can use to make some.

https://www.acidmods.com/forum/index.php?topic=10574.0

[cwn723]

just try it, youll get good at modding soon, then you will be happy.