Author Topic: help with psp led mod  (Read 2496 times)

Offline salmonson

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
help with psp led mod
« on: February 23, 2008, 03:04:08 PM »
B4 any1 says anything yes i have searched around the forums b4 making this topic.


First of all i have a PSP slim (even if that matters)
I'm trying to figure out what equipment i need to get L&R trigger LED, D-Pad LED, XO/\[]   
button LED,and LED in back of PSP with jewel.

I have a PSP battery with 3.6v and 1200 mAh.

Does any1 know what equipment i need to do this? the type of LED I'm using is tri-colored.

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: help with psp led mod
« Reply #1 on: February 23, 2008, 07:21:30 PM »
um idk i have only ever done led mod with 0603 leds i sugest you do the same, lol. Nah if someone gives you the thumbs up give it a try. you will probaly need 30 guage wire and a soldering iron  :tup:
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline salmonson

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
Re: help with psp led mod
« Reply #2 on: February 23, 2008, 08:04:31 PM »
yeah on this website evey1 says use 0603 led's so i will do tha same once when i learn what equipment i will need to do it. im so confused. :dntknw:
« Last Edit: February 23, 2008, 08:06:03 PM by salmonson »

Offline tanoz

  • Chaos Lover
  • *
  • Posts: 273
  • Post quality +0/-0
Re: help with psp led mod
« Reply #3 on: February 23, 2008, 09:49:41 PM »
you will need a phillips head size 0 screwdriver, soldering iron(20-30 watts is good for a beginner), solder, 30 awg wire(kynar is good) and i think thats abt it because u already have leds. just find some solder points used by other ppl and you should be good to go
Lots of gaming stuff but too lazy to mention =]

Offline i22foosh

  • Granny Spanker
  • *
  • Posts: 469
  • Post quality +0/-0
  • Gender: Male
Re: help with psp led mod
« Reply #4 on: February 23, 2008, 09:54:37 PM »
For the led mod on triggers, dpad, []OX/\

30-gauge Kynar wire (best to have different colors)
2x 0603 LED’s
1x 191k-ohm Resistor
1x 30k-ohn Resistor
1x LM386 Audio Amplifier IC
Hot glue gun (optional)
Soldering Iron (nothing more then 15 Watt)
Solder (.015 size works best)
Flux
Drill
3/16 bit

Jewel:

kynar wire
1-4 0603 led
Jewel
Dremel Tool to cut the circle out
having a higher post count doesn't earn respect in the forums, quality posts do.

thanks,

deda and reaper

Offline salmonson

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
Re: help with psp led mod
« Reply #5 on: February 24, 2008, 04:07:58 AM »
alright thx guys. does these equipment work while usind hold button mod?

Offline i22foosh

  • Granny Spanker
  • *
  • Posts: 469
  • Post quality +0/-0
  • Gender: Male
Re: help with psp led mod
« Reply #6 on: February 24, 2008, 10:54:29 AM »
Yes, it works. Just talk to a mod or something, they'll hopefully help you out.
having a higher post count doesn't earn respect in the forums, quality posts do.

thanks,

deda and reaper

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal