Author Topic: psp speaker mod help  (Read 8370 times)

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
psp speaker mod help
« on: February 04, 2008, 08:18:35 PM »
i want to put a speaker on the umd door of my psp the speaker is the size of the inside circle of the silver thingy i want to put a lm386 amplifier chip in ther also and some LED's but don't know how to wire anything

https://www.acidmods.com/JR/WiKi/PSPSoundMod/MonoSoundMod.jpg

is the speaker in that diagram the internal psp speaker or the new one

also what are the triangle thingys

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: psp speaker mod help
« Reply #1 on: February 04, 2008, 08:23:53 PM »
The speaker is the normal PSP speaker. The triangle thingys are pointing to the negative side.

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: psp speaker mod help
« Reply #2 on: February 05, 2008, 05:20:09 AM »
dude your awesome almost every question i ask you answer thaanx and if you could tell me were my new speaker and leds would go in this circuit could you show in a pic or something that i easily can understand

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: psp speaker mod help
« Reply #3 on: February 05, 2008, 05:44:01 AM »
if your asking how to wire the speaker and leds to sound chip its simply wiring in parallel


PINOY AKO

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: psp speaker mod help
« Reply #4 on: February 05, 2008, 01:41:21 PM »
so the triangle thingys are leds and could you explain why i need the resistors in on the psp stock speakers   



were in the psp is the 5v negative and positive points and also wat is the ground were is it in the psp and wat is its need

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: psp speaker mod help
« Reply #5 on: February 05, 2008, 03:48:51 PM »
so the triangle thingys are leds and could you explain why i need the resistors in on the psp stock speakers   



were in the psp is the 5v negative and positive points and also wat is the ground were is it in the psp and wat is its need
Thats the 5v and GND. If you want to put a bigger speaker, i would just wire them parallel with the regular speaker.
http://www.youtube.com/watch?v=tCt0xKS1St0&feature=user thats my psp with speaker wired in parallel, its much louder than the original.

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: psp speaker mod help
« Reply #6 on: February 05, 2008, 05:30:30 PM »
wat if i want to put both the speaker and the leds with a lm386 chip how would this work

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: psp speaker mod help
« Reply #7 on: February 05, 2008, 05:40:19 PM »
I never tried but I think you just wire the speaker if it was another LED. I tried to just wire a speaker with the LM386 and it didnt turn out well. It gave the speaker more bass but it sounded not very clear and a little fuzzy.

Offline redryno1221

  • Granny Spanker
  • *
  • Posts: 430
  • Post quality +0/-0
  • Gender: Male
    • Redrynotuts
Re: psp speaker mod help
« Reply #8 on: February 05, 2008, 05:54:16 PM »
@psp339
so what exactly did you use........ (capacitors, lm386,etc  :beg: include pics plz)

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: psp speaker mod help
« Reply #10 on: February 05, 2008, 06:21:53 PM »
This is how i wired it but the sound came out blurry but more bass.

Offline [HoP]

  • Ex-AcidMag
  • Granny Spanker
  • *
  • Posts: 361
  • Post quality +9/-3
  • Gender: Male
Re: psp speaker mod help
« Reply #11 on: February 05, 2008, 07:25:12 PM »
you would have to adjust the frequency going to the speaker so as to clear it up...

the THD for that amplified chip when using it for sound is quite high i would imagine


off to work i go, laters

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: psp speaker mod help
« Reply #12 on: February 05, 2008, 07:27:21 PM »
you would have to adjust the frequency going to the speaker so as to clear it up...

the THD for that amplified chip when using it for sound is quite high i would imagine


off to work i go, laters
how do i adjust the frequency going to the speaker?

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: psp speaker mod help
« Reply #13 on: February 06, 2008, 02:00:07 PM »
ya how would you adjust the frequency going to the speaker
also are the mmaybe its because you didn't put resistors psp339

[img]https://www.acidmods.com/JR/WiKi/PSPSoundMod/LM386Pins.jpg[img]

https://www.acidmods.com/Wiki/tiki-index.php?page=PSP%20Sound%20Mod

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: psp speaker mod help
« Reply #14 on: February 06, 2008, 03:25:47 PM »
i used the resistors...

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: psp speaker mod help
« Reply #15 on: February 06, 2008, 05:07:04 PM »
well then i don't have a clue


also does anyone know wat pins 1,8,and 7 are for

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline squee

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
Re: psp speaker mod help
« Reply #16 on: February 07, 2008, 09:20:15 AM »
If you wire in a capacitor it should keep distortion down.

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: psp speaker mod help
« Reply #17 on: February 07, 2008, 02:53:12 PM »
wat type cap. would i need to use i have many different types

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: psp speaker mod help
« Reply #18 on: February 07, 2008, 07:35:17 PM »
looooooooook at this it makes sense in some ways

http://www.national.com/ds/LM/LM386.pdf








thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: psp speaker mod help
« Reply #19 on: February 07, 2008, 07:37:01 PM »






sorry for the double post the pics weren't working

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal