Author Topic: Face Button Mod/LED's  (Read 1655 times)

Offline dennisrr

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
  • Gender: Male
  • Modder
Face Button Mod/LED's
« on: February 13, 2008, 01:38:28 AM »
I'm wondering on how to properly do the face button mod.
I've already done the trigger mod and looking forward to doin the face button mod as well. If possible, can someone show me the +/- points to solder at and how the resistor should be wired up? I can do the calculations just a picture (even on paint or anything) on how the wiring should be done. I wired the trigger mod to hold if that helps. I also think that I did the trigger mod to hold wrong...cause it definately works, but it isn't too bright...and I didn't use a resistor. So can anyone help me out?
Trigger mod to hold switch.
Current status:ACHIEVED

Attempting face button mod
Current status:No Progress

Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
Re: Face Button Mod/LED's
« Reply #1 on: February 13, 2008, 01:43:41 AM »
where did you wire the trigger leds to ?

Offline dennisrr

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
  • Gender: Male
  • Modder
Re: Face Button Mod/LED's
« Reply #2 on: February 13, 2008, 01:49:55 AM »
Trigger mod to hold switch.
Current status:ACHIEVED

Attempting face button mod
Current status:No Progress

Offline redryno1221

  • Granny Spanker
  • *
  • Posts: 430
  • Post quality +0/-0
  • Gender: Male
    • Redrynotuts
Re: Face Button Mod/LED's
« Reply #3 on: February 13, 2008, 01:42:45 PM »


next time surround the pic with

Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
Re: Face Button Mod/LED's
« Reply #4 on: February 13, 2008, 03:45:58 PM »
then wire these leds to the speakers
http://i230.photobucket.com/albums/ee18/teh_0verl0rd/holdleds.jpg
Right there.
then wire there leds to the speakers directly to the speakers

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal