Author Topic: oh Crap! help!!  (Read 4710 times)

Offline SSBB for the wii

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
oh Crap! help!!
« on: February 04, 2008, 07:08:16 PM »
ok i got the black wii casing, got that all done, works fine, but i also did my wii remote, and now the pointer won't work, my other wii remote works fine in the same spot, the buttons all work, but i get no signal. did i break it??!!  :cry2:

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: oh Crap! help!!
« Reply #1 on: February 04, 2008, 07:13:25 PM »
check the sensor bar and make sure it's on, did you get a replacement wiimote case? did you use the black thing that goes in front of the wiimote that came with it? if you did switch it with the original one and that should fix it.

Offline SSBB for the wii

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #2 on: February 04, 2008, 07:34:01 PM »
sensor bar is on, yes it was a replacement case and yes i replaced it with the new black thing that goes in the front,t everything is normally, but it's not working, i don't get it

i don't know what to  :censored: do!!!

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: oh Crap! help!!
« Reply #3 on: February 04, 2008, 07:50:30 PM »
replace the black thing with the original one

Offline SSBB for the wii

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #4 on: February 04, 2008, 08:08:17 PM »
i tried that already AAAAHHH!!!!  :fear:

Offline anthonyta

  • MFH
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +1/-0
  • Gender: Male
Re: oh Crap! help!!
« Reply #5 on: February 04, 2008, 09:59:40 PM »
try going back to the original white case to see if it works idk aha

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: oh Crap! help!!
« Reply #6 on: February 04, 2008, 10:05:14 PM »
take it apart again and put it back together that's always worked for me  :hifive:

Offline SSBB for the wii

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #7 on: February 05, 2008, 08:35:35 AM »
it's been apart like 6 times already, and i tried going back to the white case, still nothing, every button, the speaker, the motion sensing, everything works, EXCEPT the pointer.  :fear: :fear: :confused:
« Last Edit: February 05, 2008, 08:56:23 AM by SSBB for the wii »

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #8 on: February 05, 2008, 07:42:52 PM »
Are you sure everything is connected right, its probably something that got messed up with the IR. If you could post some pics if something looks out of the ordinary that would be good.

Offline Craker

  • Ω Allumnist Ω
  • *
  • Posts: 140
  • Post quality +0/-0
  • Gender: Male
  • I mod, then I exist
Re: oh Crap! help!!
« Reply #9 on: February 06, 2008, 05:02:59 AM »
ok i got the black wii casing, got that all done, works fine, but i also did my wii remote, and now the pointer won't work, my other wii remote works fine in the same spot, the buttons all work, but i get no signal. did i break it??!!  :cry2:

Its strange, i have few problems with wiimotes but always is for buttons and mods, but it so strange the pointer doesnt work. Also you don't used any soldering iron ?¿?¿?¿

P.D. The mods we made are too dangerous for your console, don't try at home if you don't have knowledge ;)

Offline SSBB for the wii

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #10 on: February 06, 2008, 09:06:48 AM »
this was so easy though, tri wing screw driver, take out the 4 screws in the back, pry it open, i do it gently, but it always pops open really fast no matter how slow i do it.

then take out the inards, and but them all in the black casing, and but the screws back in,

http://i115.photobucket.com/albums/n311/chaingun1259/P2060013.jpg

http://i115.photobucket.com/albums/n311/chaingun1259/P2060019.jpg

http://i115.photobucket.com/albums/n311/chaingun1259/P2060020.jpg

http://i115.photobucket.com/albums/n311/chaingun1259/P2060021.jpg
« Last Edit: February 06, 2008, 10:32:19 AM by SSBB for the wii »

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #11 on: February 06, 2008, 11:46:01 AM »
quick question, did you put on your sensor bar correctly?

Offline SSBB for the wii

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #12 on: February 06, 2008, 01:10:50 PM »
oh my gosh do you guys read my posts, the sensor bar is fine, my toehr wiimote works ..the pointer is my only problem

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #13 on: February 06, 2008, 02:47:10 PM »
oops sry i didn't see that one, umm make sure all the ir pins are on the pcb for the wiimote. If thats not the case then your probably just going to have to buy a new wiimote

Offline SSBB for the wii

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #14 on: February 06, 2008, 07:55:05 PM »
what is a infrared pin?

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #15 on: February 07, 2008, 01:06:16 PM »
Like all the pins that hold the infared light in place

Offline SSBB for the wii

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #16 on: February 09, 2008, 09:25:33 AM »
all the soldering points on the underside of it are still there, if that's what you mean, i don't know how they would have come undone

Offline seikene

  • Acid Modder
  • *
  • Posts: 645
  • Post quality +0/-0
  • Gender: Male
Re: oh Crap! help!!
« Reply #17 on: February 09, 2008, 10:59:37 AM »
You think you can send any pics mate?
Proud to be a: -Yugioh Player -ITG/DDR/PIU Player -Furry Fanatic - Knife Thrower -All around awesome guy :D

Offline SSBB for the wii

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: oh Crap! help!!
« Reply #18 on: February 09, 2008, 07:20:00 PM »
i already did... mate.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal