I was wondering if I can actually use an RC antenna (basically an antenna that can stretch out to be longer, and it's used on most radios). I wanted to try it out, so I did the usual, soldred a cable to the wifi board from the black wire, then I soldered the other end of the wire to the wire the antenna is connected to. I tested it and it didn't work, so I keep thinking that the solder contact are too weak. If anyone can correct me and tell me it's wrong, then I'll understand, or else if it's possible, please tell me what I'm doing wrong. You have to see this though. I switched the case (btw its a phat DS) with a black one, so it looks really nice. I have the antenna right on the stylus slot, and I had to cut a piece of the holder, but it fits perfectly with the ds closed. I'll post pics tomorrow.