led switch

[afataldonkey]

i am aware that you can wire your leds to your hold button, but will i be able to but an extra power switch and then use that switch to turn my leds on and off and if i can, how would i wire this?
here is what i am talking about.
http://www.dealextreme.com/details.dx/sku.4044

[psphacksntips]

i think so just cut a hole on the psp trim (above the original psp powerswitch) and just wire the power switch

[GhoSt]

you should hyperlink it http://www.dealextreme.com/details.dx/sku.4044 you can always do wat i did and add a discrete switch under battery cover a 2 way dip switch worked for me.

[Luke]

you should hyperlink it http://www.dealextreme.com/details.dx/sku.4044 you can always do wat i did and add a discrete switch under battery cover a 2 way dip switch worked for me.

ok back to topic notice it has for pin outs make it so you wire ground to one and postive to one then get more wires and do the same make one a postive and a negative but i think you have to bridge some to it works im not sure i use  switches acctully made for that

[afataldonkey]

thats what i was looking for a switch with 4 pins hoping that i could wire the ground and the negative to two pins and then wire my led ground and negative to the other two pins. if this would not work, could you tell me where you get your switches and tell me how to wire them up? im looking to do a mod with at least 5 different colored leds, plus sound reactive leds in the triggers so i need as many switches i can get and they need to be easy to use.

[Luke]

you can use broken wifi board switches i think thats wat bubble dutch does i dont know i forgot

[afataldonkey]

ok thanks ill check and see if i can find some wifi board switches.

[i22foosh]

Dude all you need is a basic small switch.

Look

- - -

Those are the 3 points on a switch. You connect the wire(s) to the points. Make sure theyre next to eachother. When you turn the switch, theres a metal on the bottom, making the 2 metals connect, turning the lights on. When you move it, the metal only touches 1 wire and it wont turn on..

[GhoSt]

Dude all you need is a basic small switch.

Look

- - -

Those are the 3 points on a switch. You connect the wire(s) to the points. Make sure theyre next to eachother. When you turn the switch, theres a metal on the bottom, making the 2 metals connect, turning the lights on. When you move it, the metal only touches 1 wire and it wont turn on..

i agree it doesnt need to be a psp switch, most 2 way ones should work