Razor / Dual Analog Info.

[Mythtron]

Hi,

Along with my other to-do mods, I also plan on doing the Dual Analog mod (aka Razor). I just have one two questions :

 

BTW: I am asking because I plan to make a homemade PCB.

Thank-You,
Mythtron

[Mythtron]

This is the only design I could find in the tutorial/Wiki section:


If you will notice, the individual designs aren't very clear, and since I would like the final , outcome PCB to be neat and professional looking (^like the Round'ish design in the first post above^)...I did it up a bit:


Also made a roundish one (just in case I use that type):


PS: They are all correct sizes (you can see for yourselves, and I just thought  I'd share these w/ the community)...if they can be used, Can they? (although I see no reason for them not to work).

Thanks,
Mythtron

[Mythtron]

Thanks,
Mythtron

[SYSTEM aka (Cyberpyrot)]

Thanks,
Mythtron

the square was rev 2 of the razor the round was rev 3... the razor when though so many revisions..

[Mythtron]

the square was rev 2 of the razor the round was rev 3...  the razor when though so many revisions..

Ohh....okay. So that's why... Then I assume that the round one is better, right? And how come there wasn't any type of homemaking picture to print like there was for the square? (<--or maybe I just missed it? )

[SYSTEM aka (Cyberpyrot)]

there it is in your last post.. and the round was created to eliminate a spring contact problem we had..

[DUKE]

why not just buy a razor X?

[EintrachtManu]

It's toooo expensive!

[Mythtron]

It's toooo expensive!

/agree 

here it is in your last post..  and the round was created to eliminate a spring contact problem we had..

lol...yea, well if I hadn't made that....
what is the size supposed to be of the board when it's cut and ready to be fitted w/ the nub? 1cmx1cm? cause I want to make sure it is the right size.

[Mythtron]

nvm...I tested it (the round design above) out myself. It fits perfectly (I just printed it out, cut a single piece, and placed it on my analog's board....perfect! )

So if anyone wants to use the above pics for their homemade razors, feel free to do so, and know that they will fit, if nothing else ;P

Thank-You,
Mythtron