Author Topic: Rapid Fire Method (No Chip) (Read 371516 times)

omgitsdan · « **Reply #360 on:** September 01, 2008, 07:00:45 PM »

Hey guys, I just had to make an account to show my appreciation for this incredible mod! I was pretty skeptical when I saw the "kits" on ebay and I was glad to find a method that only cost me $2.99

http://img20.imageshack.us/img20/994/0901082048dm1.jpg
http://img137.imageshack.us/img137/1604/0901082048aqb5.jpg

Works great and the button I bought was perfect, as it is big enough to be right next to the real trigger (I hot glue-gunned it to keep it in place).

Anyway, I'm off to play some COD

Blazinkaos · « **Reply #361 on:** September 02, 2008, 10:52:26 AM »

mmm yea its cool even tho its really visible...

The switched for link 3 and 4 should work they worked for me...and others controllers i modded..

tymopar44 · « **Reply #362 on:** September 04, 2008, 05:13:01 PM »

Hey guys im new to this but if you guys would help me it would be greatly appreciated . i have a cg style controller and a matrix controller the older style and i was wondering if someone was willing to help and give me some pics of what i need to do to make them a turbo controller with or without a chip without if possible thanks

thedarkness · « **Reply #363 on:** September 04, 2008, 05:52:13 PM »

is there ANY possible way of using this method with an older controller w/o the chip in the center?

Blazinkaos · « **Reply #364 on:** September 04, 2008, 06:12:51 PM »

Did you guys take the time to read through the whole thread..

thedarkness · « **Reply #365 on:** September 04, 2008, 06:22:17 PM »

Well where can I get an older controller then?

Blazinkaos · « **Reply #366 on:** September 04, 2008, 06:30:45 PM »

Well either ebay or um u can ask around acidmods see if someone can sell u one...or if that to much maybe one the members can do the mod for u ur choice..

thedarkness · « **Reply #367 on:** September 04, 2008, 06:32:45 PM »

ok thanks for the input

Blazinkaos · « **Reply #368 on:** September 04, 2008, 06:37:10 PM »

Yup no problem..

Evilslayer73 · « **Reply #369 on:** September 07, 2008, 10:05:39 AM »

hi every body i have a new cg controller and i have a question does i need absolutely a chip 555 for it work on a new cg or there is another solution thanks

phillyman1025 · « **Reply #370 on:** September 07, 2008, 06:08:04 PM »

Does the point not on the LED still work if I burnt the LED? Also how did you wire it through the controller so the buttons did not get in the way? Any help would be great.

Blazinkaos · « **Reply #371 on:** September 07, 2008, 06:14:11 PM »

Guys plz read the whole thread there are pics of ppl doing theres and how they did....

thedarkness · « **Reply #372 on:** September 07, 2008, 07:13:38 PM »

Quote from: Evilslayer73 on September 07, 2008, 10:05:39 AM

hi every body i have a new cg controller and i have a question does i need absolutely a chip 555 for it work on a new cg or there is another solution thanks

sleeper mod from acid mods store. get the kit. its like 13 bucks.

Blazinkaos · « **Reply #373 on:** September 07, 2008, 09:07:54 PM »

thank you someone read the thread.

cod4sniper. · « **Reply #374 on:** September 11, 2008, 09:30:26 AM »

will this work with an old wired controller???

SplitboXer · « **Reply #375 on:** September 13, 2008, 08:49:56 PM »

Mike you're still the man... Where ya been??!!

This worked first try no problem. If you guys read the first post mike made you will have no issues...

#1 Make sure you have an "old style" wireless controller.
#2 Solder as the diagram shows. Either to the led or to the spot on the board. (Mine is on the board and works perfect.)
#3 Put controller back together carefully.
#4 Do not use brand new batteries, I found that any battery in my home (ie, tv remotes, toys, etc) work.... no problem. Batteries that have been in a controller for more than 15 minutes of play work also. Rechargeable batteries should work fully charged or not.

chunkyyluvr5 · « **Reply #376 on:** September 15, 2008, 06:10:44 PM »

Couple questions:
How do we tell if out controller has the new chipset (or whatever)
Where could we get a button like that

SplitboXer · « **Reply #377 on:** September 15, 2008, 06:20:20 PM »

For your first question.... use the search button.
second, you can get them at ANY Radio Shack or local electronics store.

Blazinkaos · « **Reply #378 on:** September 15, 2008, 10:27:11 PM »

Quote from: SplitboXer on September 15, 2008, 06:20:20 PM

For your first question.... use the search button.
second, you can get them at ANY Radio Shack or local electronics store.

^^^^ Gotta help out the new ppl u kno...

SplitboXer · « **Reply #379 on:** September 16, 2008, 01:22:57 PM »

I thought I was helping?
I thought I was helping.

I do not have a wired controller to test this but below are a few pictures of the ring LED layout on the controller, it appears the connection points are different. I did not take these pictures, I found them on another website.
Wireless layout

Wired layout

It seems that if you wired to the to either spot on the board marked with 1, or the right side of the LED it self this would work on a wired controller. Has anybody tested this?

Blazinkaos · « **Reply #380 on:** September 16, 2008, 10:07:08 PM »

yea well this mod is very easy and if the lights dnt light switch the led around thats what i did and works great and very glowy too.
But good pics did make those SplitboXer or did u find them.