Author Topic: PSP MATT's psp mod... hopefully :help:  (Read 2154 times)

Offline psp matt

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Gender: Male
  • ...it wasn't me >.>
PSP MATT's psp mod... hopefully :help:
« on: May 01, 2008, 02:47:22 PM »
ok. well first off- im new. ive looked around. i ve never dome any modding. :help: what i want to do is:

-get a pandoras battery DONE
-make a magic memory stick DONE
-get psp cfw 3.90 m33 - 3 w/ 1.50 kernal addon DONE-i have 3.80 m33-5 w/ kernal addon
-get a clear psp faceplate. (is XCM a good brand? as is scratches and screwholes etc.) ALMOST DONE
-buy some led's, kyane wire, a battery powered soldering iron, open up my psp and add trigger led's
 that are wired to the hold switch.
-hmm... and cleer buttons. ALMOST DONE

can yall give me some feedback.
oh heres the faceplate:
http://www.dotconsole.com/product_p/psp-xcm-crystal.htm

does it come with a #001 screwdriver and buttons or do i have to buy them separatley...  :nono:
i hope it works :P   :w00t: :help:
« Last Edit: May 11, 2008, 09:26:32 AM by psp matt »
</center>5.00m33-6 psp phat. supported psp since 2.71 and remembered when homebrews home was psu.</center>

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: PSP MATT's psp mod... hopefully :help:
« Reply #1 on: May 01, 2008, 03:03:40 PM »
if u have never done any soldering or anything like that then its gonig to be a little harder than u think. and for the pandora and mms i have them for sale check my thread in auctions

Offline P3nnyw1se

  • Acid Modder
  • *
  • Posts: 862
  • Post quality +1/-0
  • Gender: Male
  • AcidMaG
    • Myspace
Re: PSP MATT's psp mod... hopefully :help:
« Reply #2 on: May 01, 2008, 03:12:15 PM »
Don't go with battery powered iron...they tend to REALLY suck...go with a 15W one from radio shack, and like Folk said, it's not easy to solder on tiny tiny points, so get some practice in before you decide to do so.  Good Luck


Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: PSP MATT's psp mod... hopefully :help:
« Reply #3 on: May 01, 2008, 03:51:47 PM »
i can hook u up with a clear faceplate and a pandora battery and mms

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline TaSlAyEr

  • E = MC²
  • *
  • Posts: 342
  • Post quality +0/-0
  • Gender: Male
  • i has a shovel lolz
Re: PSP MATT's psp mod... hopefully :help:
« Reply #4 on: May 01, 2008, 07:52:02 PM »
i can hook u up with a clear faceplate and a pandora battery and mms
dude dont buy a pandora and mms PM me ill give you links to make ill walk you though  on how to make it

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: PSP MATT's psp mod... hopefully :help:
« Reply #5 on: May 01, 2008, 08:01:11 PM »
ya if u have the supplys i can make it for u for free that is wat i meant

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline psp matt

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Gender: Male
  • ...it wasn't me >.>
Re: PSP MATT's psp mod... hopefully :help:
« Reply #6 on: May 02, 2008, 05:13:40 AM »
well i have downscaled it to magig memory stick (i have an extra 512mb stick. is this enough?)
and pandoras battery. should i do it to my ONLY battery???

and faceplate

link: http://www.dealextreme.com/details.dx/sku.4121

and buttons:

link: http://www.dealextreme.com/details.dx/sku.2979

tell me ur opinions :)

 :hifive:
</center>5.00m33-6 psp phat. supported psp since 2.71 and remembered when homebrews home was psu.</center>

Offline psp matt

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Gender: Male
  • ...it wasn't me >.>
Re: PSP MATT's psp mod... hopefully :help:
« Reply #7 on: May 11, 2008, 09:31:03 AM »
ok yall. my psp is pimp! ive used all but 75mb of my 2 gig. its loaded with homebrew to of my umd's 1.50 kernal all these awesome soft mods i have the applecor theme for 3.80 and my cpu is raped up to 330 with other stuff. i also got psptube to work. its really bad though. u have to type stuff in the url.  :faint: anyways. yeaya!!! where can i get some awesome waves for my psp background?
</center>5.00m33-6 psp phat. supported psp since 2.71 and remembered when homebrews home was psu.</center>

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: PSP MATT's psp mod... hopefully :help:
« Reply #8 on: May 11, 2008, 11:34:53 AM »
Just go to google and type "psp custom waves", you'll get what you need.

Offline TaSlAyEr

  • E = MC²
  • *
  • Posts: 342
  • Post quality +0/-0
  • Gender: Male
  • i has a shovel lolz
Re: PSP MATT's psp mod... hopefully :help:
« Reply #9 on: May 11, 2008, 01:13:32 PM »
ok yall. my psp is pimp! ive used all but 75mb of my 2 gig. its loaded with homebrew to of my umd's 1.50 kernal all these awesome soft mods i have the applecor theme for 3.80 and my cpu is raped up to 330 with other stuff. i also got psptube to work. its really bad though. u have to type stuff in the url.  :faint: anyways. yeaya!!! where can i get some awesome waves for my psp background?
your you can go to consolespot.net they have alot of custom themes you'll have to mess with your flash0 to get them to work so back up your vsh file case you :censored: up lol

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal