PSP controller mod question

[ryan012254]

I just finished my PSP controller mod  but i am having a slight problem when i hit any diagonal and the dpad on the controller the R trigger hits 2 any info u can give me to fix this?

[j.s2ghetto]

maybe u soldered on the psp dpad wrong

[Ch4rL13]

dude this is like one of the hardest mods, nice
show a pic of ur mobo with a tag with ur name on it pls

[j.s2ghetto]

that is wat i thought and he is only a guppy well post a pic of mobo and dpad and all ur other solder point so we can see wat is wrong and maybe the controller interior but first psp

[ryan012254]

all of that is covered with glue and im not about to go tearing it off right this second

[Blizzrad]

It sounds like the solder points may be shorting inside your controller, does it happen only when the controller is connected?

[DubbleDutch]

sweeeeeeeeet mod man!!!

anyway the connections to the buttons might be touching eachother.

did u solder the x o etc. buttons to the zif connector or just to the powerboard, since to the powerboard is easier

[*FuFa]

It sounds like the solder points may be shorting inside your controller, does it happen only when the controller is connected?

They could also short inside the PSP too, so sorry bud, you will have to rip apart your PSP again and check.

[Blizzrad]

They could also short inside the PSP too, so sorry bud, you will have to rip apart your PSP again and check.

The D-pad and R-trigger solder points are on opposite sides of the PSP from each other. I don't know exactly how he has everything wired out to the connectors, but this is why I'm guessing the short is in the controller. Disconnecting the controller from the PSP and testing the same buttons will tell you where the problem is, you shouldn't need to open them both up.

[ryan012254]

it only happens on the controller the psp itself is fine.
video's up http://uk.youtube.com/watch?v=cWHwPiQiBpk

[j.s2ghetto]

nice song lol wat is it need to get that and blast it in my moms car lol

[Blizzrad]

Nice work, if the problems only occur when the controller is connected then that is where your problem is. Open up the controller and check for continuity between your D-pad and R1 solder points.

[ryan012254]

I fixed the diagonal problem all my sodder points were fine so i tried cutting the tracks around the button connector on the controller and it worked 


awsome mod Blizzrad

[Blizzrad]

I fixed the diagonal problem all my sodder points were fine so i tried cutting the tracks around the button connector on the controller and it worked 


awsome mod Blizzrad

Right back at you man, I can appreciate how much work goes into a project like this and yours is really amazing, very professional looking. I'm glad you got everything worked out, looks like this is a good week for DualShock mods.