Hey guys here is the layout that i think all tutorials should be in make a more standard view of the tutorials section. got any suggestions to improve the layout then post in here any suggestions so that i can add them
Tutorial Title
Introduction
paragraph to explain what they are about to acomplish.
Parts Needed
- i.e. faceplate (including links to suppliers)
- i.e. faceplate (including links to suppliers)
Tools Needed
- i.e. Solder Iron(including links to suppliers)
- i.e. Solder Iron(including links to suppliers)
Difficulty rating: X/5
Average Time to Complete: i.e 30-45mins
Notes:
What makes it difficult ie small soldering high dexterity
Step By Step Tutorial
1- step that needs to be completed i.e remove metal cage behind lcd or whatever
image for step one
2- step that needs to be completed i.e remove metal cage behind lcd or whatever
image for step two
etc
FAQ/ Troubleshooting
- problem one that usually happens
- problem two that usually happens
- etc
Here is the code for the tutorial layout above
[center][size=25pt][color=red][u][b]Tutorial Title[/b][/u][/color][/size][/center]
[color=yellow][u][b][size=13pt]Introduction[/size][/b][/u][/color]
paragraph to explain what they are about to acomplish.
[color=yellow][u][b][size=13pt]Parts Needed[/size][/b][/u][/color]
[list]
[li]i.e. faceplate (including links to suppliers)[/li]
[li]i.e. faceplate (including links to suppliers)[/li]
[/list]
[color=yellow][u][b][size=13pt]Tools Needed[/size][/b][/u][/color]
[list]
[li]i.e. Solder Iron(including links to suppliers)[/li]
[li]i.e. Solder Iron(including links to suppliers)[/li]
[/list]
[color=blue][b][size=13pt]Difficulty rating:[/size][/b][/color] X/5
[color=blue][b][size=13pt]Average Time to Complete:[/size][/b][/color] i.e 30-45mins
[color=yellow][u][b][size=13pt]Notes:[/size][/b][/u][/color]
What makes it difficult ie small soldering high dexterity
[color=yellow][u][b][size=13pt]Step By Step Tutorial[/size][/b][/u][/color]
1- step that needs to be completed i.e remove metal cage behind lcd or whatever
image for step one
2- step that needs to be completed i.e remove metal cage behind lcd or whatever
image for step two
etc
[color=yellow][u][b][size=13pt]FAQ/ Troubleshooting[/size][/b][/u][/color]
[list]
[li]problem one that usually happens[/li]
[li]problem two that usually happens[/li]
[li]etc[/li]
[/list]
