Console Modding------ ( Here you can talk about your favorite Consoles ) > Tutorials

XBox 360 Controller Led swap

<< < (2/2)

pujolsfan02:
ok so i accidentally took off the contact.. :( so how exactly do i scrape off the paint from the trace? like what exactly is the trace??

Jumbo:

--- Quote from: pujolsfan02 on June 30, 2009, 09:46:54 PM ---ok so i accidentally took off the contact.. :( so how exactly do i scrape off the paint from the trace? like what exactly is the trace??

--- End quote ---
Use a Xacto knife to carefully scrap the trace until you see copper. Then take some flux and solder and tin the pad. Then u can either solder the led to it if its close enough or use a piece of wire to make the trace long enough to reach.

Navigation

[0] Message Index

[*] Previous page