Author Topic: why does my psp only work when the faceplate is off?  (Read 1152 times)

Offline tripsalot

  • ♥ Poker Champ ♠♣
  • *
  • Posts: 242
  • Post quality +0/-0
  • Gender: Male
    • modder knowledge
why does my psp only work when the faceplate is off?
« on: June 02, 2008, 06:42:10 AM »
ok heres my problem,i took my psp apart to do the rings of light,got the umd door done,started some music to see the leds blink and all was good.i used the rubber thing from the buttons to make sure i had good connections and all the buttons worked and they do untill i put my faceplate on then the left direction dont work.took it back off and made sure everything was in the right spots and made sure it wasnt the d pad sensor,put the face back on and no left again?

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: why does my psp only work when the faceplate is off?
« Reply #1 on: June 02, 2008, 07:00:29 AM »
have you tryed to see if its the screw just behind the psp were youscrew the face back on the one by the d pad it happends to everyone.

or

is you connections clean they mite have a bit of dirt or swet on them
come to the rite place if you kiss admins as they promote you to admin.

Offline tripsalot

  • ♥ Poker Champ ♠♣
  • *
  • Posts: 242
  • Post quality +0/-0
  • Gender: Male
    • modder knowledge
Re: why does my psp only work when the faceplate is off?
« Reply #2 on: June 02, 2008, 08:00:19 AM »
i have tried that i took it all apart as far as i had it cleaned every thing and put it back together,still didnt work so i did it again to see if i missed anything then i got it to work some times if you pressed realy hard.

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: why does my psp only work when the faceplate is off?
« Reply #3 on: June 02, 2008, 08:33:22 AM »
make sure you slid the lcd cage to the left into the dpad properly, i dunno how to explain it lol

Offline tripsalot

  • ♥ Poker Champ ♠♣
  • *
  • Posts: 242
  • Post quality +0/-0
  • Gender: Male
    • modder knowledge
Re: why does my psp only work when the faceplate is off?
« Reply #4 on: June 02, 2008, 08:52:15 AM »
well after a few hours of getting nowhere,i decided it worked before i did the ring of lights so i took the wires for it out and put my lcd cage back and reassembled it now it works but i dont have my ring of lights.i guess it was just me being stupid and not my psp,thanks for the help

Offline crashman2k7

  • Who Farted ???
  • *
  • Posts: 206
  • Post quality +0/-0
  • Gender: Male
Re: why does my psp only work when the faceplate is off?
« Reply #5 on: June 02, 2008, 01:18:42 PM »
your probaly grounding out sumwhere
remember all metal parts in the psp is ground =)

Offline sprocketme2

  • Motor Mouth
  • *
  • Posts: 99
  • Post quality +0/-0
Re: why does my psp only work when the faceplate is off?
« Reply #6 on: June 02, 2008, 01:56:40 PM »
Something you may check is whether the d-pad plastic lached into place against the lcd cage. 2 little tabs on the black plastic part of the dpad have to go into some notches in the LCD cage.
My flickr profile: http://www.flickr.com/photos/47542734@N06/
Contains all my photos for public viewing

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal