« previous next »
Pages: [1]   Go Down

Author Topic: power switch to note button  (Read 1977 times)

Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
power switch to note button
« on: May 31, 2008, 08:36:15 PM »
ive got a security switch mod in plan but i need to know if the power board could be done similarely to the phats power to note button and also how to set up the wifi switch to perma-on
Logged
It's been a long time

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: power switch to note button
« Reply #1 on: May 31, 2008, 09:42:03 PM »
Solder the top and middle pins of the wifi switch to make it permanently on.
Logged

VoX

  • Guest
Re: power switch to note button
« Reply #2 on: June 01, 2008, 05:43:27 AM »
You can link the power on to the note button with the PSP Slim, but it is not recommended as you will lose the functionality unless you make a electronic switch which requires a certain amount of time in which you have to hold it to activate the switch, say for example: You hold down the button for a second and it changes the Equalizer, hold for half a second it turns on/off the PSP
Logged

Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
Re: power switch to note button
« Reply #3 on: June 01, 2008, 12:11:31 PM »
i dont use the note button at all as is, so im ok with losing its functionality, i just want to be able t use it for power on/off. i also want to rig it with the wifi switch so that the wifi must appear to be on in order for it to work
Logged
It's been a long time

Offline alexandercyle

  • Ω Allumnist Ω
  • *
  • Posts: 137
  • Post quality +0/-0
  • Gender: Male
  • dont put marbles in your nose!!!
Re: power switch to note button
« Reply #4 on: June 01, 2008, 06:23:00 PM »
Quote from: psp339 on May 31, 2008, 09:42:03 PM
Solder the top and middle pins of the wifi switch to make it permanently on.
i think it would be the left and middle  :hifive:
Logged

VoX

  • Guest
Re: power switch to note button
« Reply #5 on: June 01, 2008, 07:55:23 PM »
I'm not completely sure about this but you will have to solder from the note button pin on the home bar connector to the left pin of the WiFi switch
Logged

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
Re: power switch to note button
« Reply #6 on: June 01, 2008, 08:10:59 PM »
put a PIC in there :cool: make any button control any button
nic0 can help u wit it, i think anyways lol
Logged

VoX

  • Guest
Re: power switch to note button
« Reply #7 on: June 01, 2008, 08:17:35 PM »
Quote from: Talos on June 01, 2008, 08:10:59 PM
put a PIC in there :cool: make any button control any button
nic0 can help u wit it, i think anyways lol

I already told him about this and he said he wouldn't bother because he doesn't care about losing button functionality.
Logged

Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
Re: power switch to note button
« Reply #8 on: June 03, 2008, 01:41:50 PM »
i dont have the expertise or equipment for a pic, and i dont care for the note button, but what i want is a dual security switch, im going to lift the top pad on the switch [power switch] wire it to the wifi switch, which will be rigged to NOT control wifi because wifi will be permanently on. then from the wifi switch to the note button so that in order to turn it on you must have the switch closed and the note button pressed. what i need is info on whether this is possible or im just wasting my time, and i also need some pics of the slim mobo/pobo thanks for all your help guys i hope i kinda cleared up what i want a lil bit
Logged
It's been a long time
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal