Author Topic: 5v Spot on powerboard?  (Read 1480 times)

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
5v Spot on powerboard?
« on: June 04, 2008, 02:00:23 PM »
Is there a 5v spot on a powerboard of the slim? If so, can that be used for the sound mod instead of the activity LEDs power sources. Last time I soldered to the power source of the memory stick LED, the LED stopped working.

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: 5v Spot on powerboard?
« Reply #1 on: June 05, 2008, 01:06:45 AM »
Is there a 5v spot on a powerboard of the slim? If so, can that be used for the sound mod instead of the activity LEDs power sources. Last time I soldered to the power source of the memory stick LED, the LED stopped working.

Go here dude.

https://www.acidmods.com/forum/index.php?topic=13495.0

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: 5v Spot on powerboard?
« Reply #2 on: June 05, 2008, 09:10:11 AM »
Guys that image is so old. I think from the time I first started using a meter. To answer your question there is a 4.9 volt spot on the PB but when you use it it dims the Power/Charge light so bad. you know if you follow the trace from the Mem and Wifi leds you can get a location to solder to by scraping off some enamal. The reasion your Leds dont light up anymore is cause you fried the resisters (to much heat for to long). I suggest you use a 15watt iron and flux next time (if you wernt before).  :victory:


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: 5v Spot on powerboard?
« Reply #3 on: June 05, 2008, 09:29:12 AM »


i just got the voltage from nico and yes when you solder to that point the led will be dim or gone completely

i soldered a powerboard with leds once using the point and the power neg and the power didn't work but charge still did

PINOY AKO

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: 5v Spot on powerboard?
« Reply #4 on: June 06, 2008, 09:52:49 AM »
4dp, I think the one green spot you have on the led is actuly 2.8 or 2.6 but I could be wrong its been a long time since I looked. Other then that thats a good image with great info.


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal