Author Topic: arrggg!!  (Read 2568 times)

Offline p3t3r_m

  • Motor Mouth
  • *
  • Posts: 89
  • Post quality +0/-0
  • Gender: Male
arrggg!!
« on: June 06, 2008, 03:57:27 AM »
i had to replace the heatsink paste on ma brothers pc cos he took it of and now it is runnnin over 60degrees C and its a pentium D would that be a problem or will that damage it ime not sure if it will or not any ideas ?
BLARG!!

VoX

  • Guest
Re: arrggg!!
« Reply #1 on: June 06, 2008, 06:01:40 AM »
Yes, that will damage it. It should not run at 60 Celsius normally, it should only get up to that temperature when the CPU is under alot of stress. Get some arctic sliver 5 and use that thermal paste instead

Offline tmandt

  • Club AM VIP
  • E = MC² Mad Scientist
  • *
  • Posts: 1544
  • Post quality +1/-0
  • Gender: Male
  • o.O tOny! JDMKID
Re: arrggg!!
« Reply #2 on: June 06, 2008, 10:12:09 AM »
thats way to hot!

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: arrggg!!
« Reply #3 on: June 06, 2008, 10:15:27 AM »
My old pentium D ran over 60C with the stock cooler. I replaced the cooler and it ran a little lower. Then I replaced with a $60 cooler and it ran at 40C idle and 50 C load.

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: arrggg!!
« Reply #4 on: June 06, 2008, 03:47:14 PM »
Under load, your CPU should be running at 60 C max. Currently mine only gets to about 43 under load. Get a better heatsink and possibly add another fan.

Offline p3t3r_m

  • Motor Mouth
  • *
  • Posts: 89
  • Post quality +0/-0
  • Gender: Male
Re: arrggg!!
« Reply #5 on: June 07, 2008, 10:07:11 AM »
well its not mine so ime not that bothered just aslong as its not gona melt a hole in the floor or sumet but ihave an overclocked version of this in my computer that only runs at 47degrees c so thats y i asked and the heatsink paste i got did cost bout $3-4 FOR 25g tube so its not exactly gonabe the highest quality but i am not spendin more than what i have done on it as its not my problem its his now muahaha lol
BLARG!!

Offline Onii

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 65
  • Post quality +0/-0
  • Gender: Male
Re: arrggg!!
« Reply #6 on: June 07, 2008, 02:31:02 PM »
If you let it run that hot you'll end up ruining your CPU and maybe even the mobo. Was it runnin that hot before you replaced it? Did you clean it before putting on the new paste? Maybe you should just reseat the thing, bad placement happens once in awhile. Spend the 12 bucks and get AS 5 by the way.

Offline SMOKEN

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
Re: arrggg!!
« Reply #7 on: June 08, 2008, 05:26:20 AM »
:D I'm running with an AMD athlon and i have removed the heat sink many times fo various time periods and conditions ,never replaced the paste but it still work's well.I dunno what kind of paste it is but i dont think that anything can damage it or make i obsolete(exept washing it off of course).I'm always running at 34 Cell  39 Cell max.Thou the place where the heat sink attaches broke and now gravity is holding it in place. :D

phenomenal

  • Guest
Re: arrggg!!
« Reply #8 on: June 17, 2008, 03:07:35 PM »
Although its very hot, cpus only start to get damaged at about 100 C

Offline Reaper

  • Fear the Reaper!
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2765
  • Post quality +1/-0
  • Gender: Male
  • Fear the Reaper
Re: arrggg!!
« Reply #9 on: June 17, 2008, 03:25:52 PM »
Although its very hot, cpus only start to get damaged at about 100 C
yeah thats true, but at the same time its the difference between a racing motor and a regular motor, sure if you redline the cars (over 100C on a CPU)  they'll both blow up, but the regular car will have a longer lifespan

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: arrggg!!
« Reply #10 on: June 18, 2008, 10:43:04 AM »
60C is nothing to worry about, and i wish people would learn this.

You dont need to be worried until 75C +
Retired Modder, minor dabbling from now on :P

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal