Author Topic: How do i do the dual nub  (Read 1762 times)

Offline Dark_Daniel

  • Ω Allumnist Ω
  • *
  • Posts: 106
  • Post quality +0/-0
  • Gender: Male
  • Teach Me how to Mod
How do i do the dual nub
« on: June 20, 2008, 03:48:13 PM »
plz tell me some pics maby :beg:
hi:)

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: How do i do the dual nub
« Reply #1 on: June 20, 2008, 04:12:32 PM »
order a razor x from coolmods.co.uk

Offline afataldonkey

  • Ω Allumnist Ω
  • *
  • Posts: 136
  • Post quality +0/-0
  • Gender: Male
Re: How do i do the dual nub
« Reply #2 on: June 20, 2008, 10:15:27 PM »
order a razor x from coolmods.co.uk
ooh what a great explanation. can you tell me how to do the hard drive mod? seriousely the kid asks for pics and stuff and all you do is type in 5 words and think its good. and to stay on topic, you will need to follow the tut for the phat, but instead of soldering to the powerboard, solder to the pins that you connect the ribbon cable into. i would post pics but i dont have my psp with me. also i wouldnt recommend doing it this way because you can really :censored: up your mobo. i would just wait until nic0 releases a tut for it. hope this helps

VoX

  • Guest
Re: How do i do the dual nub
« Reply #3 on: June 21, 2008, 07:43:59 AM »
It is considerably harder for the PSP slim because you are soldering to the little pins on the motherboard. If you can solder very well, It wont be a problem but if you can't I'd wait for a tutorial or similar

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: How do i do the dual nub
« Reply #4 on: June 21, 2008, 02:39:18 PM »
It is considerably harder for the PSP slim because you are soldering to the little pins on the motherboard. If you can solder very well, It wont be a problem but if you can't I'd wait for a tutorial or similar

so true, took one look at where i need to solder and left it. not that good at soldering, just made my first trigger led mod today. thats easy compared to that. but if you are good, go for it and post some pics!  :tup:

Offline alexandercyle

  • Ω Allumnist Ω
  • *
  • Posts: 137
  • Post quality +0/-0
  • Gender: Male
  • dont put marbles in your nose!!!
Re: How do i do the dual nub
« Reply #5 on: June 21, 2008, 07:52:59 PM »
if you have you psp apart maybe you can help me and maybe i can help you

Offline Dark_Daniel

  • Ω Allumnist Ω
  • *
  • Posts: 106
  • Post quality +0/-0
  • Gender: Male
  • Teach Me how to Mod
Re: How do i do the dual nub
« Reply #6 on: June 23, 2008, 10:29:47 AM »
well i have my black slim dat i dnt really care bout nd i wanna do this mod on dat one nd if i do corectly ill jst get a new faceplate maby red i dunno red iz good or grey ya no wait black nd red...
back to topic... plz post some pics :beg:
hi:)

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal