Console Modding------ ( Here you can talk about your favorite Consoles ) > 360 Controllers / 360 Rapid Fire Controllers
Wiring For 8 Pin Basic Spitfire
proaudiosoft:
well good luck on getting it working mike, keep up the hard work we all appreciate it. If I can be of any assistance let me know......
unloopme:
--- Quote from: KingMike_OS on July 23, 2008, 10:59:58 PM ---will don't try to hard to pull the code as they lock there code and when you pull the code it will damage the code and will not work.
--- End quote ---
Are you 100% sure that they lock their chips???
Nemesis:
--- Quote from: Nemesis on July 24, 2008, 05:34:50 AM ---http://forums.xbox-scene.com/index.php?showtopic=656753
i'm assuming the guy pulled the code from the PIC, anyone test to confirm working? i dont have any PIC or even a programmer so i cant do it. though people on ebay say they have put hard work into making the code, that's a load of crap, most of them just pulled the code from someone else.
--- End quote ---
KingMike_OS:
--- Quote ---Are you 100% sure that they lock their chips???
--- End quote ---
nah i just have nothing better to do so i make up stuff.
any way the hell with the ebay guy. after 2 days of try and error i got it to do this only 4 wire
683 chip and switch this was tested on a new style controller i have not test it on the old ones yet
And here is the old style working same way 4 wire only ...
unloopme:
--- Quote from: KingMike_OS on July 24, 2008, 10:54:45 AM ---nah i just have nothing better to do so i make up stuff.
any way the hell with the ebay guy. after 2 days of try and error i got it to do this only 4 wire
683 chip and switch this was tested on a new style controller i have not test it on the old ones yet
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/061Dm9Ftb0w&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/061Dm9Ftb0w&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>
And here is the old style working same way 4 wire only ...
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/56vaDy00Je4&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/56vaDy00Je4&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>
--- End quote ---
I NEVER meant to question the, King :) I was just inquiring because I was going to try and rip the code...but to HELL with that guy!!!
So when can we expect a new hex and wiring diagram, KingMike???
Many thanks, sir for all you efforts!!!
Navigation
[0] Message Index
[*] Previous page
Go to full version