wifi led swap help

[Bhawan]

ok i was doing an led swap on my psp i wasnt paying attention while i was taking the led out when i accidentally knocked down the two resistors(or whatever they are) and now what do i do?
i tested the voltage and its 5.53 v and its always there i mean looks like its not even hooked to the wifi..... its not working by the wifi its constantly there what do i do ?? please help

[socomhacker239]

um..... you can put a drop of solder there but what do you mean the wifi is always on you mean the light for the wifi?

[Bhawan]

um..... you can put a drop of solder there but what do you mean the wifi is always on you mean the light for the wifi?

i am getting a constant flow of 5.5 v on the led .........it never goes off its there no matter what its there even when the wifi is not in use

[rceckspurt13]

yeah just put a glob of solder in place of each resistor. A lot of the time people bridge the resistors anyway because itmakes the LEDs brighter.

[Bhawan]

yeah just put a glob of solder in place of each resistor. A lot of the time people bridge the resistors anyway because itmakes the LEDs brighter.

ok i am gonna give it a try....

[socomhacker239]

yup thats what i wudd do i bridge them thats what i said in the first post
but when u turn ur psp off is it still a constant flow?? also when i bridged mine it was a constant flow its looks cool when all ur lights are on there is a sertain way i did mine though i will draw a pic if you want

[Bhawan]

ok i desperately need a picture ...... its just not working......

[socomhacker239]

ok give me sometime

[Bhawan]

ok
till then i will do the power led swap....

[socomhacker239]

this is what i did if you dont understand it tell me an i will do my best to explain it mmmk
well i jus swaped the wifi led an solderd it down then i solderd a wire from the powerboard led (i also swaped) to the wifi the so when the power led comes on (when i start the psp up) the wifi led does too i also did this with the memory led well heres the pic i suck at paint but i tried lol


click on it to make it bigger

[Bhawan]

thanks for the image and stuff but thats not what i mean ...... i want to change the color of the wifi led so while getting it off i accidently broke(took out) to two resistors (both) and now i want to fix it i want to have the wifi led working but the wifi led remains on all the time what do i do

[socomhacker239]

yea since you did that this is what you shudd do i did the exact same thing

[VoX]

Well, You will need to either need to solder the resistors back on or solder one similar if you want to limit the power output

[Blazinkaos]

yea and you wanted to swap the power led so u kno there is a TUT for it and there is one part that gave me a hard time and thats when u connected the negative and positive with a single wire...just a heads up