internal chotto shot hlp

[nevekd128]

if i want to use the usb then where would i put a switch?

[robin1989]

on the voltage pin of the usb between the camera and the usb. i forget which one but im pretty sure its standard in all mini usb plugs

[nevekd128]

whow would i know which on that is?

[Arioch_76]

Hi here you can find a tut , for the internal chotto shot in a phat PSP.
And you can see where the switch is

+

[Sanctus]

Hi here you can find a tut , for the internal chotto shot in a phat PSP.
And you can see where the switch is

+

Ok i want to bring this topic back for a second xD
So i dont fully get the hole tut there. mainly because the English is not 100% lol
Just want to confirm. In the tut the purple wire is the one that you wire the dip switch to. And also i cant see where to solder the microphone too??
heres the pic
thanks

[PspKicks316]

i wouldn't eve put a switch on a + line, always put it on the ground! The unfused + line could be prone to causing a spark when switched, and this could be EXCEEDINGLY dangerous for your psp, and your Lithium battery pack

I put switches on the voltage side of many things and it's fine...

[Blazinkaos]

like static electricity sometimes you will be lucky and it wont damage your components, sometimes it wil

yea its better to be aware...but um are we all talking bout extending the usb with a switch... or am i missing the wat the thread is about...

[Sanctus]

i wouldn't eve put a switch on a + line, always put it on the ground! The unfused + line could be prone to causing a spark when switched, and this could be EXCEEDINGLY dangerous for your psp, and your Lithium battery pack

Alrite then so which color wire there is ground?