Window in ps2 case

[PcPsp13]

Hi, my parents are going to buy me a ps3 so i want to mod my fat ps2.

I want to make a window in the case and place leds behind it, but how do i cut the window out of the case?  Never done it before.

Ps. srry for my bad english 

[Jumbo]

You use a dremel and cut a Hole and usually put plexi glass behind it to stop dust, ect.

Good luck

[PcPsp13]

I can get some plexiglas from school, but i dont have a dremel >.<

[Jumbo]

LOL you cqan probly go with like a saw but ull need to do alot of sanding

[Luke]

Saw 

drill a hole and keep drilling hole then end up with a big hole then (mark out you square or wetever first) then sand it down to size then use a file to finish the job

[Jumbo]

Like a Hack saw melt of drill a hole then put the blade threw it and connect to the other ned of the saw so it throught the hole then just cut witht that i guess. IDK its really self expanlitory how to make a hole in something dont u thin k?? Just drill, cut, sand dremmel anything will do.

[PcPsp13]

Ok, a friend of me has a dremel, tomorow we are going to make the window in my playstation
but i forgot to pick up some plexiglass from school and today was our last day on school  now i need to buy it 

[redryno1221]

or go HERE for a cheap dremel

[VoX]

I used a drill but with a special head, It worked fine and made a perfect circle

[redryno1221]

I used a drill but with a special head, It worked fine and made a perfect circle

you can do that or if you want a square or any other shape a dremel will be the best tool for the job

[VoX]

I've got a big tool for polygon shapes, I still need to get a dremel though.

[PcPsp13]

or go HERE for a cheap dremel

I know where to buy a cheap dremel for €7,99-, thats like 5 $ so    Just to lazy to go and buy it