Author Topic: A NeW Way to Rapid Fire New Detailed howto video uploaded - Works for halo (Read 14787 times)

SillyNuts · « **on:** August 02, 2008, 06:25:14 PM »

Well i was bored waiting for my chip to get here from kingmike and thought i would try a few dif. ways of doing the rapid fire...

** Edit] i seen that ppl are posting that the chips dont work for halo and stuff. This dose work for halo3/cod4/shadow run/ and a few others that iv tested...
The 3 wire mod from kingmike also works well for halo3 and cod4 as well as all the other fps's iv tested

New Way .1.

Go buy a madcatz $19.99 controller the one with the pointed grips, when you take it apart you will notice that instead of having a half turn for the trigger it is a full 360 turn to make the trigger work... ok now take out the vib. moter and hot glue it to the lil plastic wheel that is under your trigger. you will need to take your trigger off... now after doing that you can hook it up the same way as all the other rapid fire mods win it comes to the neg, and pos, and button. You do not have to solder anything to the middle pin. when to moter turns it will make the connection it needs and do it fast this make it rapid fire..

This is the one i did i hooked my trigger to a foot peddle and it worked good.

http://www.youtube.com/v/OVH7XWqw6iM&hl=en&fs=1&rel=0&color1=0x2b405b&color2=0x6b8ab6&border=1

*** edit] here is the more detailed video luke

wanted hope it helps sorry about the remote my dog sucks

http://www.youtube.com/v/kQjHN1vPJCs&hl=en&fs=1

New Way .2.

Ok you can use any controller new or old... now what you need to due is go to radioshake and buy the blinking led kit for $4.99 also buy a potentiometer $1.49 partnumber 271-282,, also a 100k resister ... ok now go to youtube to fine the blinking led video my friend will be posting it follow that. after doing that and have made the led blink at as fast as possible solder and wire to the middle left pin and replace the led with the red wire and hook it to a button.
this works well . ill post the vid soon as possible.
((((Edit))))) Video added

**** note
this is my buddy that made the flashing led we just changed it a lil and in place of the led was out hook up to the fire pin on the controller

http://www.youtube.com/v/HvUjlZyhuE8&hl=en&fs=1&rel=0&color1=0x2b405b&color2=0x6b8ab6&border=1

((((Edit))))
ps.. for yall you kids thay say kingmike is a ripoff bull:censored: there was a error in hes shipping on hes site and i ended up paying to much and he called me no more thing 15 mins after i ordered and said hey man you payed to much for shipping im going to give it back. i told him to keep the money its my donation to the sit... so yall need to get over it ether pay for it or do it your self ... yes i can do it my self as iv showed .... but i want to support mike and all that he does cuz i to know what its like doing mods and hacks and no one thanking me for it or doging .... so thanks a lot mike we all thank you and want you to keep doing what you do.

SYSTEM aka (Cyberpyrot) · « **Reply #1 on:** August 02, 2008, 06:43:43 PM »

Awsome job buddy

lukep90 · « **Reply #2 on:** August 02, 2008, 08:46:51 PM »

Care to explain more? im new to controller modding, and am really interested in this method. can you take some pics of your controllers insides???? thanks a ton!

(way number 1 that is....)

SillyNuts · « **Reply #3 on:** August 02, 2008, 09:55:40 PM »

sure thing luke give me a day or so i have to get a new sd card for my cam. i have a few other methods i will post also after i take pics and make vids.

SillyNuts · « **Reply #4 on:** August 03, 2008, 09:40:20 PM »

dunno y the vids are not working just go to the link

Crazy Germans · « **Reply #5 on:** August 03, 2008, 10:06:22 PM »

it says that the video is no longer available. I wanna see how you do the 2nd one cuz that sounds like it might be a good solution.

Crazy Germans · « **Reply #6 on:** August 03, 2008, 10:08:19 PM »

hey, I wanna see how you did the blinking led rapidfire but the video isn't working. Could you send me to the video, cuz I wanna try this one out.

And also, you said that the 3 wire kit works for halo 3. What other fps games have you tested it on? An are there any that you've tested that don' work?

PspKicks316 · « **Reply #7 on:** August 03, 2008, 10:13:23 PM »

Sounds interesting. I think I have one of those kits sitting in my desk or somewhere.

Quote from: Crazy Germans on August 03, 2008, 10:08:19 PM

hey, I wanna see how you did the blinking led rapidfire but the video isn't working. Could you send me to the video, cuz I wanna try this one out.

The blinking led vid isn't even posted here...

SillyNuts · « **Reply #8 on:** August 03, 2008, 10:15:44 PM »

yes i know im fixing the vid and ill be making the blinking led vid soon like tomm. or so.

SillyNuts · « **Reply #9 on:** August 04, 2008, 02:23:44 AM »

videos are fixed

SillyNuts · « **Reply #10 on:** August 04, 2008, 05:25:46 AM »

admin please fix the videos please and thanks

Jumbo · « **Reply #11 on:** August 04, 2008, 06:45:39 AM »

you dont embd the videos on acimods. you just post the link to the video then put it inbetween

PspKicks316 · « **Reply #12 on:** August 04, 2008, 07:36:00 AM »

You can't embed videos here using the youtube links, you need to just get the link from the address bar for the vid(http://www.youtube.com/watch?v=xxxxxxxxx) and put url tags around it.

Crazy Germans · « **Reply #13 on:** August 04, 2008, 08:07:03 AM »

I don't understand how the led one works. Can you do a tut on how to make it?

PspKicks316 · « **Reply #14 on:** August 04, 2008, 09:36:33 AM »

I've got the little blinking led kit, tried a few ways with it on the controller without anything extra and I got nothing.

Wanna post a tut on how to make it fast like in the vid, and then I'll see if I can get it to work on the controller.

SillyNuts · « **Reply #15 on:** August 04, 2008, 10:08:23 AM »

well i cant make a vid tut right now cuz my son is asleep ... but ill draw a pic and how that helps if not use the vid i posted you dont need that much from radioshak to do it.

(module box) (neg. , pos. Wire) (led)
___________
| |-----------|--\
| |----------|--/
-------------

in side of the box you will find the bored you will see the resister in the left uper side of the box take and solder the left pin of your pot. to it then solder the right pin the the capacitor . cut off the to lower pins and bam you have it now just turn the pot and make the led blink faster. then hook the ground wire to the middle pin of your controller.

like i said if this dont help you please wait till i can make the video or watch the vid i put under way .2.

PspKicks316 · « **Reply #16 on:** August 04, 2008, 10:12:00 AM »

Uhm. What? I have the led module here, all of the components are under that black adhesive crap that's on it...maybe you have a different one...

SillyNuts · « **Reply #17 on:** August 04, 2008, 10:20:46 AM »

i have the $4.99 from radioshake its a black box with 2 wires coming out to a led.... with 2 AA batteries

man if you can solder go buy the stuff to do the way 2 video it will cost you about 6$ and will take about 15 mins

SillyNuts · « **Reply #18 on:** August 04, 2008, 10:23:39 AM »

by doing the way in the way 2 video i was able to make it the same speed as the chips all you do is turn the pot allmost all the way to the right but not all the way to where the led is blinking so fast it looks like it is staying on.......

PspKicks316 · « **Reply #19 on:** August 04, 2008, 10:34:58 AM »

Quote from: SillyNuts on August 04, 2008, 10:23:39 AM

by doing the way in the way 2 video i was able to make it the same speed as the chips all you do is turn the pot allmost all the way to the right but not all the way to where the led is blinking so fast it looks like it is staying on.......

Stop double posting. And obviously I can solder. Uhm, I've got the kit. Anything else you need?
And mine's not a black box. Mine's different.. =[

Crazy Germans · « **Reply #20 on:** August 04, 2008, 11:29:07 AM »

can u post the product numbers for what you used to do this? And when do you think you can gett the vid up?

SillyNuts · « **Reply #21 on:** August 04, 2008, 11:38:18 AM »

i can get the vid up by this time tommro ya ill put the part numbers up asap im moding controllers right now just got mikes new chips

Crazy Germans · « **Reply #22 on:** August 04, 2008, 12:02:50 PM »

great thanks. I want the part numbers cuz then I can mess with it myself cuz I've got some time today.

kink192 · « **Reply #23 on:** August 04, 2008, 03:04:10 PM »

wow, the first idea seems really...inventive but i think ill give the second a shot, can you send me a pic of the schematic, its kinda hard to see from the vid.

Crazy Germans · « **Reply #24 on:** August 05, 2008, 04:44:27 PM »

I bought the blinking light kit, but it doesn't look anything like the stuff in the vid.

Radioshack Blinking LED Module

Can you please put up a tut of how you did it?

corby7 · « **Reply #25 on:** August 06, 2008, 07:39:14 AM »

LOL What will they think of next.

SillyNuts · « **Reply #26 on:** August 06, 2008, 08:03:21 AM »

the schematic is in the first part of the movie the 2nd schematic not the first. and. the part numbers are on the comments on youtube.
iv got to fix my card reader so i can post more vids.

Crazy Germans · « **Reply #27 on:** August 06, 2008, 09:31:41 AM »

Quote from: SillyNuts on August 06, 2008, 08:03:21 AM

the schematic is in the first part of the movie the 2nd schematic not the first. and. the part numbers are on the comments on youtube.
iv got to fix my card reader so i can post more vids.

yeah, but this seems like you did it a completely different way than ur friend. You said you used a Pot, the radio shack led kit, and a 100k resistor. And you friend used 1k resistor, 10k pot, 470uf Capacitor and NPN transistor. They seem like they're completely different, and it sounds like yours would be easier.

That's why I want to know how you did yours.

SillyNuts · « **Reply #28 on:** August 07, 2008, 06:40:28 AM »

no thay are not really diff. i used a 1k res. a 10k pot not 100k and everything in the led kit is really the same 470uf and a npn NOT pnp!

Crazy Germans · « **Reply #29 on:** August 07, 2008, 08:45:13 AM »

So is this how you wired yours??

Lol @ freehand

SillyNuts · « **Reply #30 on:** August 07, 2008, 09:36:19 AM »

lol nice drawing ... but yes allmost the pot has to be installed in the led module right next to the i think it is a 320uf or somthing dunno what it is on yours put the left pin of the pot top the right pin of the uf. and the right pin of the pot to the res. then lead out

Crazy Germans · « **Reply #31 on:** August 07, 2008, 10:13:52 AM »

okay, I'm a lil confused. Can you just point it out on this pic? That'll clear all things up and then I'll go to radioshack and buy the stuff.

SillyNuts · « **Reply #32 on:** August 07, 2008, 10:18:36 AM »

no i cant that is not the same one..... what all does that have on it ?

Crazy Germans · « **Reply #33 on:** August 07, 2008, 11:02:13 AM »

this is what I have

Blinking Led

What did you get?

SillyNuts · « **Reply #34 on:** August 07, 2008, 11:17:32 AM »

its the kit ill go buy another one later today and take a pic of it iv gotta pick up more parts anyhow ..

check this out you might like it better

https://www.acidmods.com/forum/index.php?topic=21683.0

PspKicks316 · « **Reply #35 on:** August 07, 2008, 11:30:07 AM »

That is the ONLY blinking led kit from Radioshack, stop telling us there's another one.

Crazy Germans · « **Reply #36 on:** August 07, 2008, 11:30:22 AM »

yeah, I think I'm gunna go try that one out now. I hope I have enough spare change to get the stuff tho cuz I'm broke.

Crazy Germans · « **Reply #37 on:** August 07, 2008, 07:01:31 PM »

so did you end up getting to radio shack to get a new kit? I really wanna try this one cuz it seems easy.

SillyNuts · « **Reply #38 on:** August 08, 2008, 08:03:29 AM »

no i havent yet crazy i will today after work i get off at 4 my time us central ............

and for pspkicks dude iv looked all allmost every thread you have posted in and found how you got 2000+ post you post in every thread that you can telling ppl there

dont work or thay are posting to much or thay are wrong ... are you :censored:ed in the head or did your mom just f uck all of your friends ? and that ended up making you hate everyone cuz you have no more friends back off ppls nuts and stop posting in my threads dude you cant get

to work cuz you are D U M B! not becuz ppls

dont work kingmike has tested my ways and thay work alot of ppl that can you know follow a simple dirg. got it to work i can not help that you cant. iv posted and posted showing you and all you do is say nope i cant do it so it must not work you are a true N00B if you ask me i dont call ppl noobs but my friend you are a N00B no 2 ways around it. now after reading this i know you want to post but dont no one that reads this thread wants to know nor cars what you have to say so go fine some other thread to add them post up you 15 year old forum w h o r e ......

stay in school kid and get a dig. or 3 like most of us and then find a nice forum and try helping ppl like we do not w h o r e around the forum with your lil art team tag as if anyone gives 2 :censored:s im 22 years old and have seen 10 year olds have more respect then you. your dad needs you beat your ass every now and then give you some act right lil boy ........

iv said my peace

feels much better

Crazy Germans · « **Reply #39 on:** August 08, 2008, 08:15:04 AM »

Lol, it's not that SillyNuts. PSP just saw this pic and has lived his life by it ever since.

SillyNuts · « **Reply #40 on:** August 08, 2008, 08:16:33 AM »

lol nice one

Crazy Germans · « **Reply #41 on:** August 08, 2008, 12:20:09 PM »

So are you gunna get the stuff for this one today, cuz I'd like to do it today? And when turned up all the way, is the led method faster than the 555cn method?

SillyNuts · « **Reply #42 on:** August 08, 2008, 12:55:46 PM »

no the 555cn timer is the faster one bro its dam close to the real chip from kingmike you cant really tell them aprat

Crazy Germans · « **Reply #43 on:** August 08, 2008, 01:00:06 PM »

Quote from: SillyNuts on August 08, 2008, 12:55:46 PM

no the 555cn timer is the faster one bro its dam close to the real chip from kingmike you cant really tell them aprat

is it a lot faster than that low power 555 timer? Cuz I did that one and I wasn't really impressed cuz the stuff in H3 didn't shoot any faster.

SillyNuts · « **Reply #44 on:** August 08, 2008, 01:06:02 PM »

yes its faster ...

News:

Author Topic: ** A NeW Way to Rapid Fire ** New Detailed howto video uploaded - Works for halo (Read 14787 times)

Author Topic: A NeW Way to Rapid Fire New Detailed howto video uploaded - Works for halo (Read 14787 times)