Author Topic: LM386 IC board  (Read 3264 times)

Offline zbblanton

  • Acid Modder
  • *
  • Posts: 979
  • Post quality +5/-0
  • Gender: Male
    • My modding site
LM386 IC board
« on: September 01, 2008, 02:30:50 AM »
I made this board because i really liked the board Alien_X made but i didnt have smt lm386s and smt resistors so i created one that's smaller then a penny but also has IC holes.

Here is the comparison picture(my phone camera sucks):


Here is the files:
The schematic:http://www.mediafire.com/?hhganajajga
The board:http://www.mediafire.com/?naa44agfaaa
« Last Edit: September 01, 2008, 02:33:13 AM by zbblanton »

Offline zbblanton

  • Acid Modder
  • *
  • Posts: 979
  • Post quality +5/-0
  • Gender: Male
    • My modding site
Re: LM386 IC board
« Reply #1 on: September 01, 2008, 03:46:50 AM »
NICE!

But, it doesn't work :(

The bottom traces aren't connected to the top player pads, - use a via.
And you could do it with one side and it would be same size if not smaller

well done buddy.

I don't get what u mean all the wires are connected to the pins

Offline zbblanton

  • Acid Modder
  • *
  • Posts: 979
  • Post quality +5/-0
  • Gender: Male
    • My modding site
Re: LM386 IC board
« Reply #2 on: September 04, 2008, 06:21:36 PM »
Update:

I added another ground pad so u wouldn't have to have two wires on one pad and it didn't effect the size at all.

so heres the new files:
Schematic:
http://www.mediafire.com/?xylgpliljem
Board:
http://www.mediafire.com/?aablgcbdsdp

i made three of these boards and they came out awesome.
here the picture:
« Last Edit: September 04, 2008, 06:26:49 PM by zbblanton »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal