Author Topic: PSP 5.50 Gen B2 won't update to Gen C  (Read 2186 times)

Offline LaserShark

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +0/-0
  • Gender: Male
  • PSPFTW
PSP 5.50 Gen B2 won't update to Gen C
« on: March 22, 2010, 07:36:44 PM »
I just got a new psp 2000 with a Ta-088v1 motherboard. I'm trying to install cfw Gen D3 on it, but I can't get past Gen C. Whenever I try and flash the firmware it gets to about 75% and then bricks.  I've bricked my psp at least 10 times so far.
I KNOW that the R trigger isn't functioning perfectly and often acts like it's pressed down continuously.
Could this be causing my psp to brick?
« Last Edit: March 22, 2010, 07:37:56 PM by LaserShark »

Offline SN!P3R

  • Millennium Poster
  • *
  • Posts: 1444
  • Post quality +0/-10
  • Gender: Male
Re: PSP 5.50 Gen B2 won't update to Gen C
« Reply #1 on: March 22, 2010, 07:43:22 PM »
Does the PSP go to recovery when you boot it?
BEST 360 MODDING
HELP OUR ECONOMY!

360 MASHUP THREAD

Offline LaserShark

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +0/-0
  • Gender: Male
  • PSPFTW
Re: PSP 5.50 Gen B2 won't update to Gen C
« Reply #2 on: March 23, 2010, 11:55:28 AM »
yeah, it does. I know it does this because the R button is continuously activated.

Offline SN!P3R

  • Millennium Poster
  • *
  • Posts: 1444
  • Post quality +0/-10
  • Gender: Male
Re: PSP 5.50 Gen B2 won't update to Gen C
« Reply #3 on: March 23, 2010, 12:02:24 PM »
Just get a new conductive pad for the abxy and r-trigger
BEST 360 MODDING
HELP OUR ECONOMY!

360 MASHUP THREAD

Offline LaserShark

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +0/-0
  • Gender: Male
  • PSPFTW
Re: PSP 5.50 Gen B2 won't update to Gen C
« Reply #4 on: March 23, 2010, 12:45:55 PM »
I'm going to, but do you think that has anything to do with my psp bricking?
It should be able to flash the firmware fine, but it keeps freezing

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal