need help with no chip mod.

[stealthy]

i modded to the first person led light and the middle of the trigger pins. then when i tried it it didnt work anyone know y?,or how to fix it in any way??

[blackburn]

is it wired or wireless?

[Hazer]

This topic has a thread like 20 pages long, and the answer was never clearly summarized in the first page. Due to that, I will give you the short answer:

This trick only works on Matrix older controllers, and only if the batteries are worn down (or you use rechargables, but not the plug and play). It works because the Matrix uses PWM signals to drive the LEDs, and they are sinked. The CG uses just a DC voltage to drive the LEDs and they are sourced (outside the trigger voltage range).

Even if you do have the right controller and use underpowered batteries, this mod  in comparison to any other rapidfire solution for many reasons: You cannot control the speed so it pretty much only works for COD and sloppy at that;

Stick with a chip. It will last longer.

[blackburn]

actually Hazer you are wrong, before i went to chips i used that method and i have it working on the CG board 

[Hazer]

actually Hazer you are wrong, before i went to chips i used that method and i have it working on the CG board 

Does anyone else wanna run the answer on this? I have no desire to waste the breath.......

[PspKicks316]

actually Hazer you are wrong, before i went to chips i used that method and i have it working on the CG board 

That's because you're one of the 1% of people who actually read the topic before trying it, and you actually did it CORRECTLY, not just like "OI DID DA NO CHIP RAPIDFIERZ AND IT DUNT WERK WAT DO I DO?!

[Hazer]

Kicks, are you actually saying that the player indicator 'no chip' method works on the new CG wireless? Your reply makes it sound like you agree with blackburn.....

[PspKicks316]

No, old one. Wait. CG=old or new?

[Hazer]

CG is the new one. Blackburn is saying that he got this to work on the new ones. I just spent an hour combing through 13 pages of dribble to confirm what my oscilloscope says: the CG LED does not use a PWM signal, and hance no rapidfire by wiring to the player LED on the CG.

[PspKicks316]

Oh. If CG is new then no it won't work. He's lying. I thought CG was the old one Now I remember, old is matrix. I could care less about names. I jsut know them as old/new.

[KingMike_OS]

actually Hazer you are wrong, before i went to chips i used that method and i have it working on the CG board 

Like hazer sad don't work on New No way and never will with out the chip

It works on old only if follow the guide lines on batt power level

So please stop telling people they wrong who trying to help

and stop opening topic that already there just need to search for it

Do i need to make a FAQ or TUT on how to search on acidmods

Would that