Led in Trigger Mod Also as Led in Sound Mod

[vennale]

 Hi! guys,

    can I use the led in led mod over hold switch, to the sound mod? I mean using the same led for both mod. Assuming i'm gonna use the wifi switch for sound mod. Won't it burn out the led if both mod is on?

[m@DDm!k3]

it mite work but i wouldnt try it on just the fact as it doesnt look as noticable that is sound sensitve as if you were to put it in the shoulder puttons idk my personal opinion

[vennale]

  would 2 leds fit on triggers? i mean 2 on left and 2 on right, so that 1 for each mod.

[vennale]

  would 2 leds fit on triggers? i mean 2 on left and 2 on right, so that 1 for each mod.

[ApheX]

  would 2 leds fit on triggers? i mean 2 on left and 2 on right, so that 1 for each mod.

you could do that, it might be a little hard to get two leds in the same trigger hole tho. as long as you make the hole big enough to place the leds in a good position then it would be fine.

[vennale]

  thanks for the reply guys!, I though it would be cool if it can be done the 2 mod at 1 led per trigger.

[Thorax]

Why don't you use just one LED in each and make 1 switch (Hold switch) to turn the leds on regularly. Then once the master switch (Hold) is on, you turn on the Sound Reactor switch (Wifi switch). It would make it a ton easier.

[vennale]

  Thanks Thorax, the leds won't blow if two mods are "ON" together?

[Thorax]

They shouldn't.