Author Topic: Xbox 360 Sound Reactive LED Mod Without PulseVU  (Read 8585 times)

Offline Mogler

  • Research & Development
  • Who Farted ???
  • *
  • Posts: 219
  • Post quality +11/-0
  • Gender: Male
  • Seeding bittorrents like a digital pimp, son.
    • Indie Game Zone
Xbox 360 Sound Reactive LED Mod Without PulseVU
« on: February 28, 2010, 07:15:11 PM »
Xbox 360 Sound Reactive LED Mod Without PulseVU

Sound Reactive LEDs in Xbox 360 without PulseVU 2x
I put 14 blue leds in my Xbox 360 with a sound reactive circuit i made.
The total cost of the mod was like 8$ with the leds and everything.
The way i made it isent as flashy as a PulseVU 2x but it still looks nice.

Pics-


Small Tutorial
 -Parts-
3 prong 2 position switch
LED's
Tip31

Solder up the board to this diagram

"Black wire on p1 goes to ground the red wire on p1 goes to right audio"

Unmodified Diagram here...
http://www.infomaya.net/v2/index.php?showtopic=59627

Don't get a p2 connector wire the red sound wire to the right audio and wire the ground to any ground point on the motherboard, The 12v goes to any 12v point and Ground goes to any ground..
-(Sry i didn't take pics when i had my Xbox motherboard taken out.)

You can find the 12v, ground and right audio points in this link
http://forums.xbox-scene.com/index.php?showtopic=613160

Led Boards-

These are the ones i made, except i put 7 leds on each board.
(These are the boards im puting in my PC but i made them the same way tho...)
« Last Edit: August 09, 2010, 01:14:47 PM by Mogler »


Youtube: CallawayINC
Blog: Mogler

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Xbox 360 Sound Reactive LED Mod Without PulseVU
« Reply #1 on: February 28, 2010, 08:07:34 PM »
Very nice.
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline llcooljake

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Xbox 360 Sound Reactive LED Mod Without PulseVU
« Reply #2 on: August 09, 2010, 12:57:26 PM »
Hey i think your tut is great, I'm not very good at circuts though, only problem i have is the grounds? I don't see any on the circut picture you had it says underneath it though that instead of using a p1 just solder the wire to the right audio on the xbox 360 but there is two wires connected to the p1 in your diagram, where would that second wire go? and would one end be connected to the 12v source like you showed or a ground, sorry if this is confusing, Thanks for you tut and help!

Offline Mogler

  • Research & Development
  • Who Farted ???
  • *
  • Posts: 219
  • Post quality +11/-0
  • Gender: Male
  • Seeding bittorrents like a digital pimp, son.
    • Indie Game Zone
Re: Xbox 360 Sound Reactive LED Mod Without PulseVU
« Reply #3 on: August 09, 2010, 01:13:33 PM »
PM'ed

"oh i see how this could be confusing i didn't make the diagram very readable haha but the black wire that goes into p1 would usually go to the ground on an audio jack on say on a computer but u can take the black wire from p1 and wire it to the ground on any point. 'So to fix your problem just take the black wire from p1 and u can solder it to any ground point. and take the red wire to the right audio point, and only that one point showed is connected to 12v'."


Youtube: CallawayINC
Blog: Mogler

Offline llcooljake

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Xbox 360 Sound Reactive LED Mod Without PulseVU
« Reply #4 on: August 09, 2010, 02:50:36 PM »
Hey where are the audio points on the xbox 360 motherboard? Great tut, sorry for the Q's, but thanks so much for the help!

Offline eNeRGy

  • BioLogic Mods
  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
Re: Xbox 360 Sound Reactive LED Mod Without PulseVU
« Reply #5 on: August 09, 2010, 03:23:07 PM »
Nice tut this would get annoying when you are playing COD or something where shooting pulses sound.  You would have a seizure just being near it lol.
..::BioLogic Mods::..
__"Why play fair?"__

Offline llcooljake

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Xbox 360 Sound Reactive LED Mod Without PulseVU
« Reply #6 on: August 10, 2010, 11:42:33 AM »
Hey so did you take a wire and connect it to a 12v source then a resistor to the same source? Or is that just how to diagram is? Damn im so close to finishing this!

Offline Mogler

  • Research & Development
  • Who Farted ???
  • *
  • Posts: 219
  • Post quality +11/-0
  • Gender: Male
  • Seeding bittorrents like a digital pimp, son.
    • Indie Game Zone
Re: Xbox 360 Sound Reactive LED Mod Without PulseVU
« Reply #7 on: August 10, 2010, 04:59:19 PM »
"pm'ed" but the wire goes from 12v + to the resistor and the other side of resistor goes to the LED+ the black and tan wires are not connected.


Youtube: CallawayINC
Blog: Mogler

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Xbox 360 Sound Reactive LED Mod Without PulseVU
« Reply #8 on: November 25, 2010, 03:00:48 PM »
what size resistor did you use? also I found a pic for the xbox 360 for audio pinouts but cant upload it to this site. i go to addition options no pic upload, did i  miss something somewhere about how to upload pics?
« Last Edit: November 29, 2010, 08:38:38 AM by Rodent »

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal