Author Topic: Fat w/ Slim Screen  (Read 3309 times)

Offline HellReborn

  • Fart Sniffer
  • *
  • Posts: 41
  • Post quality +0/-0
Fat w/ Slim Screen
« on: October 29, 2008, 11:49:36 AM »
i was wondering if it was possible to take a slim screen and put it in a Fat? would the mobo accept it? i know i would have to redo the ribbon cable but thats ok.

Offline Knightsofwar210

  • Ω Allumnist Ω
  • *
  • Posts: 136
  • Post quality +0/-0
  • Gender: Male
    • Knightsofwar210site
Re: Fat w/ Slim Screen
« Reply #1 on: October 29, 2008, 11:57:18 AM »
I posted this questioned a while back and techinically yes you can put it in the ribbin cables have the same amount of lines as the phat one but smaller, so you'd have to be an extremely good solderer or somehow connect the slim's wires to something that can connect into the fat psp.

Offline HellReborn

  • Fart Sniffer
  • *
  • Posts: 41
  • Post quality +0/-0
Re: Fat w/ Slim Screen
« Reply #2 on: October 29, 2008, 08:03:27 PM »
ok cool thanks so the ribbon cable is the key. what about the case that holds the fat screen will it hold the slim screen?


Offline MARIOPARTY53

  • I DONT FAIL
  • BANNED
  • E = MC² Mad Scientist
  • *
  • Posts: 1526
  • Post quality +0/-0
  • Gender: Male
  • Pc Gaming Rules
Re: Fat w/ Slim Screen
« Reply #3 on: October 29, 2008, 10:13:43 PM »
no you cant, they have diffrent hardware, power needs, blah blah blah

Even you where going to solder wich is no easy task

It wouldnt work
However today I was brutally raped by a door handle, and none of my friends helped me up off the floor after ten minutes, instead they all teabaged me, all 10 of them...

Offline HellReborn

  • Fart Sniffer
  • *
  • Posts: 41
  • Post quality +0/-0
Re: Fat w/ Slim Screen
« Reply #4 on: October 30, 2008, 03:01:09 PM »
alright then thanks

Offline LeadBaron

  • ½ Pint
  • *
  • Posts: 37
  • Post quality +0/-0
Re: Fat w/ Slim Screen
« Reply #5 on: October 30, 2008, 04:39:45 PM »
All that, and the screens take different programming to work. So apart from the intense soldering skills, you would need some good software engineering background too.

Offline Blizzrad

  • Chaos Lover
  • *
  • Posts: 267
  • Post quality +0/-0
Re: Fat w/ Slim Screen
« Reply #6 on: October 30, 2008, 07:52:17 PM »
...they have diffrent hardware, power needs, blah blah blah...
...the screens take different programming to work. So apart from the intense soldering skills, you would need some good software engineering background too.

Do you guys have a datasheet or link to where you are getting this information? I am not doubting you, I am interested because I was never able to find a datasheet or much technical info for the slim's LCD.

Offline MARIOPARTY53

  • I DONT FAIL
  • BANNED
  • E = MC² Mad Scientist
  • *
  • Posts: 1526
  • Post quality +0/-0
  • Gender: Male
  • Pc Gaming Rules
Re: Fat w/ Slim Screen
« Reply #7 on: October 30, 2008, 09:33:58 PM »
Do you guys have a datasheet or link to where you are getting this information? I am not doubting you, I am interested because I was never able to find a datasheet or much technical info for the slim's LCD.
no

thats ALOT OF WORK just to run a slim screen in s phat, not worth it
However today I was brutally raped by a door handle, and none of my friends helped me up off the floor after ten minutes, instead they all teabaged me, all 10 of them...

Offline HellReborn

  • Fart Sniffer
  • *
  • Posts: 41
  • Post quality +0/-0
Re: Fat w/ Slim Screen
« Reply #8 on: October 31, 2008, 10:06:45 AM »
yeah but i think it will be worth it in the end

Offline LeadBaron

  • ½ Pint
  • *
  • Posts: 37
  • Post quality +0/-0
Re: Fat w/ Slim Screen
« Reply #9 on: October 31, 2008, 12:20:46 PM »
....Why? It's the same damn thing. You would go through all the effort and probably fail. If you are a soldering god and managed to do it, though, then the screen would be all buggered and probably wount fit in right, and the ribbons would be stretched.....It'd be a mess.

And, Ive tried an LCD swap just even between a TA-079 and TA-086 mobos, and the old screen with the newer mobo had a very dim backlight. It was still on, just very low, and needed a flashlight to see properly, so I would assume the Slim screen would be buggered in a fat PSP.

Offline Alien_X

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1010
  • Post quality +3/-0
  • Gender: Male
Re: Fat w/ Slim Screen
« Reply #10 on: October 31, 2008, 01:54:32 PM »
Do you guys have a datasheet or link to where you are getting this information? I am not doubting you, I am interested because I was never able to find a datasheet or much technical info for the slim's LCD.

It is just guesswork, he hasn't measured the screen voltages or anything.

Sigs by Alien_X
www.ax-elec.com

Offline HellReborn

  • Fart Sniffer
  • *
  • Posts: 41
  • Post quality +0/-0
Re: Fat w/ Slim Screen
« Reply #11 on: October 31, 2008, 01:56:40 PM »
i mean yeah dude it was just an idea i haven't done anything yet to it.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal