Author Topic: slim umd door question  (Read 1602 times)

Offline socomhacker239

  • E = MC²
  • *
  • Posts: 327
  • Post quality +0/-0
  • Gender: Male
slim umd door question
« on: November 05, 2008, 01:19:16 PM »
ok i have started working on my first slim psp now i just made a jewl (well i cut out the psp sighn an put a plastic folder under it) and i need to know if i can use 3mm leds to light it up without interfering with my umd drive also where do i run them so it wont get in the way of anything.I will add pics later and also can i just wire the leds to the speakers like in the fat?

THANKS!

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: slim umd door question
« Reply #1 on: November 05, 2008, 01:25:33 PM »
i think 3mm leds would be to big use 0603
and yes u can do direct to speakers but i think lm386 is better but watever floats ur boat

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: slim umd door question
« Reply #2 on: November 05, 2008, 01:33:01 PM »
Ya 3mm too big, way to big...

Offline socomhacker239

  • E = MC²
  • *
  • Posts: 327
  • Post quality +0/-0
  • Gender: Male
Re: slim umd door question
« Reply #3 on: November 05, 2008, 04:25:10 PM »
ok thanks for the help yea i would use 0603 but.....
i dont have any money good news though i found a cell phone at the park an it has blue leds  :dribble:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal