Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
try droping it againmy retared friend fixed by droping it 1Sniper- not to be an but, its special friend
Yup they will make your trigers look nasty
ive used 3mm leds and they worked alright
So do you think the 5mm would look ok because i got them at radioshack lol they might have 3mm ones or can someone give me a lik to a site were I can order them
whatch the slim its a bit harder for the yellow dock i broke my first slim like that
Lactoze, no offence or anything, but man, you've been giving lots of bs info, randomly spamming, and basically doing stuff that are making quite a few people upset (note your -7 post quility). Just stop it! You've been here only since the end of september, and you already have almost as much post count as me, even though I've only been here since around June. I'm not trying to bash anyone, but please: only post info that you know for sure is correct, don't randomly post things that aren't particularly relevent, and don't be arrogant (like some of your previous posts). Once again, I'm NOT trying to say "gtfo noob, we don't need you". Some of your info HAS been useful, so yeah. Anyways, sorry if this offended you or anything, just giving ya a headsup.And to answer this guy, like everyone said, you can't use 5mm leds in your triggers. Get 0603 smds off mouser.com and then get info from these two posts: https://www.acidmods.com/forum/index.php?topic=10815.0https://www.acidmods.com/forum/index.php?topic=20226.0And for your easy mod, I have heard that doing the usb charge is fairly easy (once again, like other people said) and I would also recommend doing a faceplate swap, or maybe even a full case swap. If you have a dremel or rotary tool, you could also try buying a jewel off here: http://wiredinput.com/ShopJewels/index.php and follow this tutorial to disassemble the psp: https://www.acidmods.com/forum/index.php?topic=13466.0 this tutorial to remove the UMD door: https://www.acidmods.com/forum/index.php?topic=18750.0 and this tutorial to remove the silver ring: https://www.acidmods.com/forum/index.php?topic=14917.0. Then, to put in the jewel, cut a small square inside the part where the silver ring used to be, big enough for you to put in a sanding tool. Then, just start sanding off most of it with a sanding attachment until there's about 1/8 of an inch left at the edge, then just use sand paper to finish it off. Every little bit you sand at the end, try to put in your jewel. It should take a little force to put it in, but not a lot.Good luck.
another easy mod for your psp, is getting a new theme or making your own theme for the psp!