help changing power led

[tapdisbong]

how do i change the power/ charge leds

[GhoSt]

I just did this again today. Tut: https://www.acidmods.com/Wiki/tiki-index.php?page=%20PSP%20Led%20Swap%20by%20-Neubit- scroll to half way down where the power led one starts

[rceckspurt13]

on a scale of 1-10, how hard will this be for a person with moderate soldering skills.

[GhoSt]

power/charge is easyer that indicator swaps. I whould say about 5, what mods have you done?

[tapdisbong]

thanks.

[TaSlAyEr]

2 out off 10 not hard at all

[LaCozTe-2028]

If you have twezers it will be way easier and flux.

[GhoSt]

and a fine tipped iron, lol I don't use flux :P can't afford another flux pen atm and I find the paste stuff hard to use.

keep in mind it can be a little tricky and 0603 is a standard not all of them are the exact same size.

hey 2 out of 10 man can I see a pic of your soldering?

[rceckspurt13]

hey 2-5 out of 10 dosent seem to bad. Ive only done the USB charge mod but I did it without solder. I've only soldered to my psp once. I soldered a led to the hold switch and it lights the ac port. I need to re-do the USB with solder though. I'd like to make the power led blue and the charge bright red.

[LaCozTe-2028]

Ohh how much is a flux pen i need one my flux pen right now is an exacto precision knife since thats what i use to flux my stuff :p

[KEIJOIRMELI]

I also think this is pretty easy. just remove the old led,solder the power led, then the charge leds other end and one wire. i did this sum month ago and it was my first mod (i think). took only some 15min from a kid like me.

But im not very good at soldering, ive seen that psp phat screen wiring, it was awesome, i could never do it!

so like 2-3 out of 10.

[tapdisbong]

i got it thanks