Author Topic: Help! I need help fitting the wires in my psp? (Read 4603 times)

thanks28 · « **on:** November 06, 2008, 10:22:17 AM »

After modding my psp I cant seem to get the wires to fit inside quite right. When I put it back together the housing won't go together all the way. Does anyone have tutorials or pictures that can show me where to put them that will be out of the way. It would be really great if someone with a modded psp can take it apart and send me pictures of where the placed they wires.

-Thanks

MARIOPARTY53 · « **Reply #1 on:** November 06, 2008, 04:52:10 PM »

Post pic of where you placed your wires and i will help you rewire some of it

thanks28 · « **Reply #2 on:** November 06, 2008, 05:13:05 PM »

I just ran them from the triggers to the speakers but the wires won't let the lcd brace go all the way down......do u have a pic of where u ran yours

MARIOPARTY53 · « **Reply #3 on:** November 06, 2008, 05:19:14 PM »

Its best if i see your wireing, I could then draw a diagram of where to wire your wires

thanks28 · « **Reply #4 on:** November 06, 2008, 08:49:27 PM »

alright but i wont be able to post a pic till tomorrow afternoon so please check back

MARIOPARTY53 · « **Reply #5 on:** November 06, 2008, 09:01:35 PM »

thanks28 · « **Reply #6 on:** November 07, 2008, 10:06:06 AM »

here i think it looks good now but you tell me lol

PspKicks316 · « **Reply #7 on:** November 07, 2008, 10:15:24 AM »

Your wire is HUGE!
Use 30awg kynar/magnet wire and you won't have a problem...
your wire is way too big.

thanks28 · « **Reply #8 on:** November 07, 2008, 11:47:28 AM »

It really isn't that big it just looks that way in the pic. It is actually a little bit smaller than the 30g wire that I have. If anyone has pictures of their psp with the wires in it I would really like to see it.

bustinthejustin · « **Reply #9 on:** November 07, 2008, 11:55:37 AM »

use magnet wire... even smaller and i believe to strip it all u need is to heat it up with a soldering iron.

Alien_X · « **Reply #10 on:** November 07, 2008, 12:27:50 PM »

Nice routing

But route it underneath the motherboard.

thanks28 · « **Reply #11 on:** November 07, 2008, 01:57:55 PM »

what is the difference in "magnet" wire and regular and where do you buy it

do you have to route it under the motherboard cause I would prefer not to if its not necessary

MARIOPARTY53 · « **Reply #12 on:** November 07, 2008, 02:59:43 PM »

ok, on the right side, wire the 2 wires under the power board connector and the dc slot connector, that should do it for the right

for the left,you gotta put it under the mobo
but if not, try to wire the wires under the dpad
like showen in pic

I will drew on the pic you made and uploaded it, but i cant promise you it will work since i havent touch the insides of a phat in more than 4 months

bustinthejustin · « **Reply #13 on:** November 07, 2008, 03:01:52 PM »

magnet wire is thinner, and has an enamel insulation which you can melt off with a soldering iron. I don't think it's possible with a 15W soldering iron though, as I don't think it gets hot enough. It is also more susceptable to shorts. Kynar wire is thicker, actually has insulation, and is harder to short out.

rceckspurt13 · « **Reply #14 on:** November 07, 2008, 03:20:59 PM »

magnet wire is available in a lot of places. You can get it from armatures of electric motors. The armature is the part in the center that spins.

MARIOPARTY53 · « **Reply #15 on:** November 07, 2008, 03:44:57 PM »

i dont recomend magnet wire
If it scratchs and the wire conected 2 postives when he didnt want it to, His psp could be a gonner

bustinthejustin · « **Reply #16 on:** November 07, 2008, 04:25:26 PM »

hmm really? how would you recommend stripping 30 awg kynar wire? I can't find a stripper that small at the source... No radioshack in canada

GhoSt · « **Reply #17 on:** November 07, 2008, 04:43:54 PM »

many wire strippers are the right size, also I have heard you can melt it with a soldering iron but I don't trust that

bustinthejustin · « **Reply #18 on:** November 07, 2008, 06:56:01 PM »

You mean like the ones that are unmarked where you have to guess the size?

GhoSt · « **Reply #19 on:** November 07, 2008, 07:02:17 PM »

they dont need to be the worlds fanciest things, mine are really crap.

bustinthejustin · « **Reply #20 on:** November 07, 2008, 07:44:35 PM »

K cool thanks. I suppose when I'm down in Toronto this weekend, I'll see if I can pick up a pair for like 5 bucks. (I live in a town of like, 4200 people... Nothing decent around unless you drive like 200km. Nearest Source is like 50km away.)

Alien_X · « **Reply #21 on:** November 08, 2008, 12:16:14 AM »

Just so you guys know..

A 15W iron is just as hot as a 150 Watt iron..
But It doesn't have the power to replace lost heat as quickly as an iron with a heating core rated at a higher wattage.

And secondly, magnet wire sucks, from radioshack get the wire wrapping tool, that will strip it fine.

MARIOPARTY53 · « **Reply #22 on:** November 08, 2008, 08:45:11 AM »

Quote from: bustinthejustin on November 07, 2008, 04:25:26 PM

hmm really? how would you recommend stripping 30 awg kynar wire? I can't find a stripper that small at the source... No radioshack in canada

lol order one in ebay

and besides, you could go to an small eltronics tool store and they will mostlikly have it

staxx · « **Reply #23 on:** November 08, 2008, 10:39:46 AM »

Quote from: bustinthejustin on November 07, 2008, 04:25:26 PM

hmm really? how would you recommend stripping 30 awg kynar wire? I can't find a stripper that small at the source... No radioshack in canada

I just use wire cutters...bought wire strippers from the source and turned out to be too big to strip the 30AWG kynar...just use wire cutters and strip it, works great. Also the source is radioshack had to be renamed after a lawsuit or some crap like that.

What i'm kinda impressed about is how he managed to squeeze those big wires in with the speakers lolol

thanks28 · « **Reply #24 on:** November 08, 2008, 01:20:22 PM »

Is there anywhere to get that really small wire like the wires that connect the speakers to the psp?

News:

Author Topic: Help! I need help fitting the wires in my psp? (Read 4603 times)