« previous next »
Pages: [1]   Go Down

Author Topic: sound reactive leds question  (Read 2332 times)

Offline idontknowwhatamidoing

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
sound reactive leds question
« on: January 02, 2009, 07:50:18 AM »
Can any1 give me a clear picture where to solder the wires?
Is there some kinda place on the motherboard or should I solder wires to directly to the speakers?
and how many leds can 1 speaker handle?
Logged

Offline armis

  • King of the Wii-tards
  • *
  • Posts: 183
  • Post quality +0/-0
Re: sound reactive leds question
« Reply #1 on: January 02, 2009, 07:55:13 AM »
« Last Edit: January 03, 2009, 06:07:54 AM by Nemesis »
Logged

Offline idontknowwhatamidoing

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
Re: sound reactive leds question
« Reply #2 on: January 02, 2009, 08:03:52 AM »
but if i dont have the amp thingy (is it even necessary?), I need to solder it to the same place, right?
Logged

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: sound reactive leds question
« Reply #3 on: January 02, 2009, 05:40:26 PM »
Quote from: idontknowwhatamidoing on January 02, 2009, 08:03:52 AM
but if i dont have the amp thingy (is it even necessary?), I need to solder it to the same place, right?

Just solder directly to the speaker connections on the mobo.
Logged

Offline idontknowwhatamidoing

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
Re: sound reactive leds question
« Reply #4 on: January 03, 2009, 03:28:47 AM »
Quote from: Sanctus on January 02, 2009, 05:40:26 PM
Just solder directly to the speaker connections on the mobo.

k, that is just what i wanted to do  :greedy:
but before I solder anything I wanna make sure what do they look like? :dntknw:
Logged

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: sound reactive leds question
« Reply #5 on: January 04, 2009, 08:29:20 AM »
Quote from: idontknowwhatamidoing on January 03, 2009, 03:28:47 AM
k, that is just what i wanted to do  :greedy:
but before I solder anything I wanna make sure what do they look like? :dntknw:

Logged

Offline LaCozTe-2028

  • BANNED
  • E = MC²
  • *
  • Posts: 353
  • Post quality +0/-0
  • Gender: Male
  • I love My Lacoste shirts
Re: sound reactive leds question
« Reply #6 on: January 04, 2009, 06:42:20 PM »
i thinks it could handle 5 leds before you feel the sound change.
Logged

Quote from: LaCozTe-2028 on October 11, 2008, 11:57:06 AM
try droping it again
my retared friend fixed by droping it
 1Sniper- not to be an :censored: but, its special friend

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: sound reactive leds question
« Reply #7 on: January 04, 2009, 06:45:00 PM »
Quote from: LaCozTe-2028 on January 04, 2009, 06:42:20 PM
i thinks it could handle 5 leds before you feel the sound change.
Yea you don't want to add too many. But the sound difference isn't very noticeable unless you have allot of leds.
Logged

Offline LaCozTe-2028

  • BANNED
  • E = MC²
  • *
  • Posts: 353
  • Post quality +0/-0
  • Gender: Male
  • I love My Lacoste shirts
Re: sound reactive leds question
« Reply #8 on: January 05, 2009, 04:12:48 PM »
if you dont know what your doing i wouldent recomend you doing it
Logged

Quote from: LaCozTe-2028 on October 11, 2008, 11:57:06 AM
try droping it again
my retared friend fixed by droping it
 1Sniper- not to be an :censored: but, its special friend

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: sound reactive leds question
« Reply #9 on: January 05, 2009, 08:28:25 PM »
Yeah, if  were you id make sure i had SOME solder skill, and also the pads for the speakers on the mobo lift REALLY easy so use flux if its heated for a second or 2 its gone.
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: sound reactive leds question
« Reply #10 on: January 05, 2009, 08:30:09 PM »
Really? I didn't notice. As nooby as I am at soldering I managed to do it with no problems. But yeah I really recommend flux and some soldering skills. Flux is your friend. This is from personal experience without it.
Logged

Sig by Kenshinffx - Thanks!

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: sound reactive leds question
« Reply #11 on: January 05, 2009, 11:59:03 PM »
Just use rossin core solder. And as for the pads coming off, I just use something like tweezers or a flat head screwdriver to hold it down while I solder the wire to it.
Logged

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: sound reactive leds question
« Reply #12 on: January 06, 2009, 12:12:27 AM »
I just solder directly to speakers instead of the motherboard so I don't accidentally lift the pads.  :yess: Works great.
Logged

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: sound reactive leds question
« Reply #13 on: January 06, 2009, 01:36:37 PM »
Quote from: psp339 on January 06, 2009, 12:12:27 AM
I just solder directly to speakers instead of the motherboard so I don't accidentally lift the pads.  :yess: Works great.

Yea that works. Just be careful not to melt your speaker though.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal