Poll

who thinks i should re-glue the plastic in place?

yes
2 (100%)
no
0 (0%)

Total Members Voted: 2

Author Topic: simple umd door mod (psp slim 2000)  (Read 3445 times)

Offline bamf97

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
simple umd door mod (psp slim 2000)
« on: November 28, 2008, 01:22:19 AM »
here is my first psp mod, extremely simple because i dont want to hurt my little baby psp. :cry2: So i did something very simple, a small clear window. Anyways, here is a youtube video:

http://www.youtube.com/watch?v=Ade1B3Jof0o

Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
Re: simple umd door mod (psp slim 2000)
« Reply #1 on: November 28, 2008, 03:49:42 AM »
I really Like you concept..

But in Future times don't make the plastic made to fit make a bit bigger, Then put glue on the outskirts of the hole on the umd door and you shouldn't get glue all over the place. Also another great addition to it would be cutting the rim and putting it back on so you still got the hole and the ring, but anyways

Great  :winker:

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: simple umd door mod (psp slim 2000)
« Reply #2 on: November 28, 2008, 04:24:58 AM »
Awesome Job buddy  :hifive:

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: simple umd door mod (psp slim 2000)
« Reply #3 on: November 28, 2008, 06:52:38 AM »
i like the concept ;) needs a better finish though ;)



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline bamf97

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
Re: simple umd door mod (psp slim 2000)
« Reply #4 on: November 28, 2008, 09:33:58 AM »
I really Like you concept..

But in Future times don't make the plastic made to fit make a bit bigger, Then put glue on the outskirts of the hole on the umd door and you shouldn't get glue all over the place. Also another great addition to it would be cutting the rim and putting it back on so you still got the hole and the ring, but anyways

Great  :winker:

I will probebly do it again, how you said,but i'm not sure so i put up a poll of who wants me to change it and who doesnt.

EDIT: also, could you make a video showing what you mean right here:
Quote
make the plastic made to fit make a bit bigger, Then put glue on the outskirts of the hole on the umd door and you shouldn't get glue all over the place.

I highlighted the part that confused me the most.
« Last Edit: November 28, 2008, 03:24:03 PM by bamf97 »

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: simple umd door mod (psp slim 2000)
« Reply #5 on: November 28, 2008, 09:48:45 AM »
Hey thats pretty cool, Like the shape you did :D

Would look way cool if you did the same on the other side!  :#1:

Than take a ring and cut piece to fit where its not clear and glue that on

But one suggestions is to sand it a little better and re-do the plastic with less glue  :victory:

Good Luck!

Always great to see some new modders around here, Welcome to Acidmods

Offline LaCozTe-2028

  • BANNED
  • E = MC²
  • *
  • Posts: 353
  • Post quality +0/-0
  • Gender: Male
  • I love My Lacoste shirts
Re: simple umd door mod (psp slim 2000)
« Reply #6 on: November 28, 2008, 05:26:58 PM »
Yup everyone is right nice mod like jumbo said do the same thing on the back and add some green leds

try droping it again
my retared friend fixed by droping it
 1Sniper- not to be an :censored: but, its special friend

Offline bamf97

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
Re: simple umd door mod (psp slim 2000)
« Reply #7 on: November 28, 2008, 06:24:54 PM »
Hey thats pretty cool, Like the shape you did :D

Would look way cool if you did the same on the other side!  :#1:

Than take a ring and cut piece to fit where its not clear and glue that on

But one suggestions is to sand it a little better and re-do the plastic with less glue  :victory:

Good Luck!

Always great to see some new modders around here, Welcome to Acidmods

I started moding the right side, but i need help on how to glue the plastic onto both the left and right. :help:  please tell me how to do it without the glue spreading. then i shall be happy!  :#1:

Offline LaCozTe-2028

  • BANNED
  • E = MC²
  • *
  • Posts: 353
  • Post quality +0/-0
  • Gender: Male
  • I love My Lacoste shirts
Re: simple umd door mod (psp slim 2000)
« Reply #8 on: November 28, 2008, 07:15:44 PM »
to make it cleaner just glue it in from the inside and use crazyglue as it wil have a better bond

try droping it again
my retared friend fixed by droping it
 1Sniper- not to be an :censored: but, its special friend

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: simple umd door mod (psp slim 2000)
« Reply #9 on: November 28, 2008, 09:16:14 PM »
Ya and dont use a lot it only takes a little tack in each corner to hold it  :victory:

Offline bamf97

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
Re: simple umd door mod (psp slim 2000)
« Reply #10 on: November 29, 2008, 11:23:36 AM »
ok, I havn't got time to cut the right side, but I re-glued the left and it looks great!  :#1:  :yess:  :psp:  :clap:  :greedy:  :dribble:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal