Author Topic: modding help (Read 1258 times)

buickgnx · « **on:** December 02, 2008, 04:04:46 PM »

every time i try to mod somthing i end up shorting it out so it wont light up evan when i use a resistor. plz help

bustinthejustin · « **Reply #1 on:** December 02, 2008, 04:07:35 PM »

Resistors won't cause things not to short. Are all connections and exposed wire covered with electrical tape?

buickgnx · « **Reply #2 on:** December 02, 2008, 04:13:39 PM »

well i would but when i just touch the wires to test it dosnt work and is shuts down. PS. it is a game boy advanced.

bustinthejustin · « **Reply #3 on:** December 02, 2008, 04:18:49 PM »

Um
1. You shouldn't mod while there are batteries in and it's on
2. Take out batteries, turn it off, then try applying tape, then test again.

buickgnx · « **Reply #4 on:** December 02, 2008, 04:26:57 PM »

still dosnt work but is does when theres no connections

bustinthejustin · « **Reply #5 on:** December 02, 2008, 06:49:40 PM »

still dosnt work but is does when theres no connections

What, the GBA? You're definitely shorting something out, or you're soldering to the wrong thing. Check your soldering connections again.

buickgnx · « **Reply #6 on:** December 03, 2008, 04:45:28 AM »

i uesed a multimeter and all.

Jumbo · « **Reply #7 on:** December 03, 2008, 02:32:22 PM »

You have to solder it really...

You cant just touch the wire then say its shorting, Its not getting a good connection id believe.

News: