Author Topic: some simple mods  (Read 3917 times)

Offline UserX

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
some simple mods
« on: December 06, 2008, 09:25:28 PM »
Here is my psp


I managed to get the nub in without removing the powerboard,


I relocated the power jack to the left side under the analog stick


also added a external WiFi antenna from a netgear USB 802N adapter as you can see it swings up when i need access to the USB port



Here is a good shot of the wireing for the nub and antenna, I simply soldered the antenna to the post soldering small coax is a real pain and this works very well, just put a bit of electrical tape on the back of the display so it don't short out


And here is the PSP all powered up




Offline Slim Hacker

  • Mr PS3
  • Millennium Poster
  • *
  • Posts: 1140
  • Post quality +0/-0
  • Gender: Male
Re: some simple mods
« Reply #1 on: December 06, 2008, 09:31:45 PM »
thats cool :tup:

Quote from: Jumbo
I herd you like stealing quotes ey?

Offline 426Climber

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
Re: some simple mods
« Reply #2 on: December 06, 2008, 11:53:38 PM »
Couple of questions.  Did you have to mod the analog itself to get it to fit under the faceplate or did removing the the charge jack give you the space you needed?  Two what holds the analog in place?

thanks

Offline wetfusion

  • Who Farted ???
  • *
  • Posts: 233
  • Post quality +6/-5
Re: some simple mods
« Reply #3 on: December 07, 2008, 03:45:52 AM »
that really creative... adding the external wifi makes any difference???
i like how you move the power jack.. always wanter to do dual nub...
 :clap:

Offline 123sample

  • Registered BST
  • Who Farted ???
  • *
  • Posts: 231
  • Post quality +1/-0
Re: some simple mods
« Reply #4 on: December 07, 2008, 04:33:57 AM »
Awesome..

Offline UserX

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
Re: some simple mods
« Reply #5 on: December 07, 2008, 08:01:56 AM »
Didn't realy "modify" the nub just put the razor X board in it
It's held down the double sided tape.
and everything works didn't loose a single function with my mods.

Offline wetfusion

  • Who Farted ???
  • *
  • Posts: 233
  • Post quality +6/-5
Re: some simple mods
« Reply #6 on: December 07, 2008, 08:19:31 AM »
1 thing for sure its not simple... a lot of work there  :tup:

Offline UserX

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
Re: some simple mods
« Reply #7 on: December 07, 2008, 09:12:42 AM »
Actualy these are simple. my next mod won't be. i plan to install a photofast with 32 gig's inside the PSP without removing the UMD drive or use of the Memory stick slot.
so yea these are simple when compaired to the next mod lol

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: some simple mods
« Reply #8 on: December 07, 2008, 11:57:23 AM »
Actualy these are simple. my next mod won't be. i plan to install a photofast with 32 gig's inside the PSP without removing the UMD drive or use of the Memory stick slot.
so yea these are simple when compaired to the next mod lol

a piece of advice if u wanna save space use the cr-5400 it might be a lil harder to wire up but if u need space its better

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: some simple mods
« Reply #9 on: December 07, 2008, 12:27:50 PM »
Actualy these are simple. my next mod won't be. i plan to install a photofast with 32 gig's inside the PSP without removing the UMD drive or use of the Memory stick slot.
so yea these are simple when compaired to the next mod lol


These are all quite complicated. There are no written tutorials for anything you have just done, and it takes some thinking. I would like to ask how you are going to install photofast with 32 gigs and not use the memory stick slot.

Sig by Kenshinffx - Thanks!

Offline UserX

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
Re: some simple mods
« Reply #10 on: December 07, 2008, 01:59:39 PM »
thats easy going to wire it directly to the Slot connection points and use a NC reed switch to cut off the photofast when i put a MS in the slot. also will have to do a bit of cutting on the body behind the UMD drive to free up space for the photofast. and yes i could use the new one that uses the mico sd but what would be the fun in that?

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: some simple mods
« Reply #11 on: December 07, 2008, 02:04:52 PM »
Oooh that's a good idea. Good luck, post pictures when you're done.

Sig by Kenshinffx - Thanks!

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: some simple mods
« Reply #12 on: December 08, 2008, 07:10:29 PM »
thats easy going to wire it directly to the Slot connection points and use a NC reed switch to cut off the photofast when i put a MS in the slot. also will have to do a bit of cutting on the body behind the UMD drive to free up space for the photofast. and yes i could use the new one that uses the mico sd but what would be the fun in that?
its saves space and u would have to do a lil less cutting

also wat pin would u cut of so that it switches cuz i would like to try that

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: some simple mods
« Reply #13 on: December 08, 2008, 07:37:16 PM »
I got a couple of questions for you.

How much of a signal improvement do you get with that antenna, and for the nub (probably been answered,) do you just use the old nub casing with the razor board?

Offline UserX

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
Re: some simple mods
« Reply #14 on: December 08, 2008, 10:13:50 PM »
I got a couple of questions for you.

How much of a signal improvement do you get with that antenna, and for the nub (probably been answered,) do you just use the old nub casing with the razor board?

depending on enviroment i get around 20 to 50% better reception and trasmition with the antenna.
and the nub is just the top half with a razor x on the bottom.

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: some simple mods
« Reply #15 on: December 09, 2008, 09:44:42 AM »
depending on enviroment i get around 20 to 50% better reception and trasmition with the antenna.
and the nub is just the top half with a razor x on the bottom.

Cool. thanks dude.

Oh, and are you entering into the comp over at pspmod?

Offline UserX

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
Re: some simple mods
« Reply #16 on: December 09, 2008, 02:26:14 PM »
yep i am entered in that one, didn't make the deadline for the contest here or i would have entered in this one as well :)

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal