PSP UMD Door speaker mod

[MarcusN]

HI there,
I am currently using some MPS70 speakers to put in one of my psp's umd door. It is work in progress at the moment so it doesn't look that good and yes i am using foam board as i find it easy to work with but i will be using a better material for the final part.

What i have done is used 4 speakers from the MPS-70 ones and took them apart. I then used the foam board to fit the speakers in and hold the magnets together. I am going to connect the 2 pairs of speakers to one amplifier board ( is this ok)
The foam board does stick out a bit due to the size of the actual speakers.

Here are some pics. (sorry for the rubbish qualtity, i had to use my psp camera as my other camera's batteries need charging)
Let me know what you think. And does any one have any idea of what material i could use for the final one?




Thanks for your help,
Marcus

[DarkShot]

Depending on the amp it should be fine.

As for the final product, what about using an acrylic sheet?? One the same thickness as the foam.

[MarcusN]

Thanks for the reply Darkshot, i dont suppose anyone else has any other ideas?
Thanks
Marcus

[rceckspurt13]

why don't you just use the umd door? As I understand it, you are replacing it with the foam? And if you use a lm386 you can hook several speakers to it.

[kink192]

i agree with darkshot. but you may want to find a way to center and align the speakers better.