Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Okay I got these leds - http://unique-leds.com/index.php?target=products&product_id=1578 and I'm doing a direct speaker reactive thing and when i connect the led to the speaker only one of the leds lights, when I try to connect 2 of them to the speaker none of them light up only if you connect one led to the speaker will it light up. What's wrong with the led's i bought?
oh...you sould have bout 0603 leds because the leds you bought are kinda big for the psp unless you are putting them in the UMD drive, do you need links to the correct leds?
You said you connect 1 led and only 1 lights, and when you connect two, none light. There is no problem with the first scenario is there? Unless you made a typo or I read wrong. As for your second problem, are you putting them series or parallel?You should also learn to solder 0603 leds otherwise you won't get very far with modding. Nothing wrong with your leds, probably your wiring. UNLESS there is not enough voltage coming out of the speaker, in which case get an amp.
also the leads going to the leds are huge so you have to make sure they are not shorting
The 0603 leds break? Or do the solder joints break. Use flux if you aren't already. I do not use lead free solder. Solder with lead is the best IMO. It holds stronger.Just don't get hyped up about not getting it soldered right. Practice makes perfectBe careful when placing the 0603's. They aren't steel Good Luck,RoBo