I cannot get my PS3 controller back together.

[Darkzero]

I've gotten it all the way back together, except the back plate. It won't snap all the way on. The R1/R2 side snaps in fine, but the L1/L2 side won't go. It's like there's something blocking it, but I can't figure out what >_<

Oh, and it's a DS3 btw. :/

[DLoc]

All I can suggest is to remove the backplate and make sure that the triggers assembly is seated all the way down and is in front of the little black plastic support.

[JUGGALOO]

Make sure the L1+L2 assembly are seated right as well as the little piece of casing in between.The piece on top of the reset button will only let the case fit one way also.