Kinda messed up LCD ribbon connector.

[alentris]

Ok, I might have messed up bad, but I'm not sure. So I was checking out my mobo after a problem I was having earlier.Then, when I was putting the LCD back in, I went to close the small latch and pushed it the wrong way down.    So, It's stuck in the unlocked position without a piece to lock or unlock it. So I put the ribbon cable in firmly, and right now It's secured in place by a piece of electric tape. So now I'm stuck between a rock and a hard place because I want to know if it works, but I don't want to ruin the lcd screen.  Any ideas  I'm kinda torn...

[LaCozTe-2028]

you dont need the black latch for the screen to work just put you screnn in and close it secure with tape or glue and voila it should work' .

[Darkzero]

I'd suggest apoxy glue if you aren't planning on ever taking it apart again. Otherwise, electric tape will work fine.

[RobTapps]

i know EXACTLY what your talking about.. the small ribbon on the LCD that little black latch it goes in to keeps falling out... i have been licky and found mine every time !!