Author Topic: need help here,, how can i dismantle my psp slim  (Read 3832 times)

Offline jay_88888

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
need help here,, how can i dismantle my psp slim
« on: January 03, 2009, 06:52:30 PM »
guys i have a psp slim and i wanted to change my face plate, but the thing is, i cant find a proper screwdriver for the job. i have an asterisk screw on top of my psp near the wlan switch. and all psp that i saw have positive screw.. hope u can help me out here.

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: need help here,, how can i dismantle my psp slim
« Reply #1 on: January 03, 2009, 08:17:53 PM »

Offline LaCozTe-2028

  • BANNED
  • E = MC²
  • *
  • Posts: 353
  • Post quality +0/-0
  • Gender: Male
  • I love My Lacoste shirts
Re: need help here,, how can i dismantle my psp slim
« Reply #2 on: January 04, 2009, 06:46:54 PM »
or you could use a hammer

try droping it again
my retared friend fixed by droping it
 1Sniper- not to be an :censored: but, its special friend

Offline treemty

  • l,,l METAL l,,l
  • Millennium Poster
  • *
  • Posts: 1231
  • Post quality +1/-0
  • Gender: Male
  • Will mod for food
    • the1337group.com
Re: need help here,, how can i dismantle my psp slim
« Reply #3 on: January 04, 2009, 07:06:36 PM »
i have one of those scrdwdriver if i can find it you can have it for free...pm me if interested

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: need help here,, how can i dismantle my psp slim
« Reply #4 on: January 04, 2009, 07:51:43 PM »
"Positive" screwdriver?
Maybe you should hold off on modding till you're older...

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: need help here,, how can i dismantle my psp slim
« Reply #5 on: January 04, 2009, 10:49:31 PM »
i use to try to make ppl see the good in u kicks but now ur just annoying u know that
get a life man how can u be telling someone u don't know to wait till there older to mod how
i thought this site was to incourage and help others to mod but lately all u do is nag nag nag this time u didn't even put something constructive on the tabel "Positive" screwdriver hilarious maybe next time tell him wat its called

and to jay ignore kicks hes been crappy lately but ya its called a phillips screwdriver

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline nez

  • Granny Spanker
  • *
  • Posts: 516
  • Post quality +0/-0
  • Gender: Male
  • Pirate For Life
    • 13xic0n administrator\owner
Re: need help here,, how can i dismantle my psp slim
« Reply #6 on: January 04, 2009, 10:57:13 PM »
j.s2ghetto is right use a small philips screw driver it is the one with four groves forming a + not a -.

Dont bother with kicks he is just some one you have to get use to it is like his vioce is nothing but rubble but this site need him so we put up with him. sike


Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: need help here,, how can i dismantle my psp slim
« Reply #7 on: January 05, 2009, 01:18:09 AM »
To hassle NOOBz
and i Loled to the sike

but ya i have heard that ppl also need to buy the torx screwdriver idk y i haven't got one like that yet and if i do i would just use my flat head and find a way


OR bite it off



thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: need help here,, how can i dismantle my psp slim
« Reply #8 on: January 05, 2009, 08:32:18 PM »

but ya i have heard that ppl also need to buy the torx screwdriver idk y i haven't got one like that yet and if i do i would just use my flat head and find a way


OR bite it off

Its on some of the PSP's (I think its only on special edition?) its  REAWY small torx bit. Its not gonna be bitten off either so yeah dont try it.

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: need help here,, how can i dismantle my psp slim
« Reply #9 on: January 06, 2009, 04:53:32 PM »
Yeah idk, they're only 99cents off DX so I bought one while I was buying other stuff. Never know when you'll need it. You could use a REALLY small drill bit, carefully drill through the head, and remove it like you would a stripped screw, and replace it with normal philips screws...

Sig by Kenshinffx - Thanks!

Offline treemty

  • l,,l METAL l,,l
  • Millennium Poster
  • *
  • Posts: 1231
  • Post quality +1/-0
  • Gender: Male
  • Will mod for food
    • the1337group.com
Re: need help here,, how can i dismantle my psp slim
« Reply #10 on: January 07, 2009, 06:39:43 AM »
Yea, I totally recommend you get one just in case...you never know we ull need it

BTW kicks you dont even know how old he is...who cares what he calls it, positive,phillips plus??? I mean I call the - one a flathead even though I am pretty sure that is not the proper name

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: need help here,, how can i dismantle my psp slim
« Reply #11 on: January 07, 2009, 02:56:55 PM »
Quoting Wikipedia:
Part of the series on
Screw drive types
 
   Slotted (flat or straight)
 
   Phillips ("crosshead")
 
   Pozidriv (SupaDriv)
 
   Square
 
   Robertson (square)
 
   Hex
 
   Hex socket (Allen)
 
   Torx
 
   Tri-Wing
 
   Torq-set
 
   Spanner head
 
   Triple square (XZN)
 
   Polydrive
 
   One-way
 
   Spline drive
 
   Double hex
 
   Bristol

Sig by Kenshinffx - Thanks!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal