« previous next »
Pages: [1]   Go Down

Author Topic: Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)  (Read 4555 times)

Offline Judgement

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)
« on: January 25, 2009, 02:12:56 PM »
H3 hex

:020000040000FA
:02000000942842
:08000800F0000308F1008C1C5C
:100010000900A01D1128AB0B16280A30AB00A01157
:100020001628AB0B16280A30AB00A01523181C2885
:100030008316051683122328A0190516A01D051284
:10004000831605128312A318292883168516831296
:100050003028A0198516A01D8512831685128312DB
:10006000231836288316051483124D28201D0510E9
:1000700020190514201C4528A10B4D28201083169B
:10008000051483122508A1004D28A20B4D28201429
:100090008316051083122508A200A318532883167F
:1000A000851483126A28201D851020198514A01C30
:1000B0006228A80B6A28A0108316851483122508CD
:1000C000A8006A28A90B6A28A01483168510831239
:1000D0002508A9008C1071088300F00E700E09002D
:1000E0004030A5000800A7010D30A600A70B762818
:1000F000A60B76280800831602309B001C141A08F1
:100100008312080083169A0002309B001C158B1383
:100110008B1B872855309D00AA309D009C149C188D
:100120008F2883128B1708008501A00107309900E2
:1001300083160F30850051309F00043095008113E5
:10014000831201309F001030A600A60BA5289F1433
:100150009F18A82840301E020318201583160C3063
:1001600085009F0183120A30AB002D30A100A8004A
:10017000A200A9007B20A300013092008316FA3070
:1001800092008C1483121215C0308B008519D3286D
:1001900073208519D328851DCB287320851DCB2876
:1001A0000230A30682200519C62873200519C62827
:1001B0006430A400732005195629A40BDA284030B6
:1001C000A3072D30A50023100A30AC007320AC0B20
:1001D000E6282314201656292D30A50023100A30B6
:1001E000AC007320AC0BF12823140A30AC00732050
:1001F000AC0BF72823100A30AC007320AC0BFD28A1
:10020000231420165629231B28292D30A50023103E
:100210000A30AC007320AC0B0A2923140A30AC005E
:100220007320AC0B102923100A30AC007320AC0BE8
:10023000162923140A30AC007320AC0B1C292310A0
:100240000A30AC007320AC0B222923142016562947
:100250002D30A50023100A30AC007320AC0B2D29E3
:1002600023140A30AC007320AC0B332923100A305E
:10027000AC007320AC0B392923140A30AC00732076
:10028000AC0B3F2923100A30AC007320AC0B45297E
:1002900023140A30AC007320AC0B4B2923100A3016
:1002A000AC007320AC0B512923142016051D5629D0
:1002B0007320851D5629201A5F290130A3062012BC
:0402C0008220C628AA
:02400E00C430BC
:1042000000000000000000000000000000000700A7
:00000001FF

Cod4 hex

:020000040000FA
:02000000942842
:08000800F0000308F1008C1C5C
:100010000900A01D1128AB0B16280A30AB00A01157
:100020001628AB0B16280A30AB00A01523181C2885
:100030008316051683122328A0190516A01D051284
:10004000831605128312A318292883168516831296
:100050003028A0198516A01D8512831685128312DB
:10006000231836288316051483124D28201D0510E9
:1000700020190514201C4528A10B4D28201083169B
:10008000051483122508A1004D28A20B4D28201429
:100090008316051083122508A200A318532883167F
:1000A000851483126A28201D851020198514A01C30
:1000B0006228A80B6A28A0108316851483122508CD
:1000C000A8006A28A90B6A28A01483168510831239
:1000D0002508A9008C1071088300F00E700E09002D
:1000E0004030A5000800A7010D30A600A70B762818
:1000F000A60B76280800831602309B001C141A08F1
:100100008312080083169A0002309B001C158B1383
:100110008B1B872855309D00AA309D009C149C188D
:100120008F2883128B1708008501A00107309900E2
:1001300083160F30850051309F00043095008113E5
:10014000831201309F001030A600A60BA5289F1433
:100150009F18A82840301E020318201583160C3063
:1001600085009F0183120A30AB001630A100A80061
:10017000A200A9007B20A300013092008316FA3070
:1001800092008C1483121215C0308B008519D3286D
:1001900073208519D328851DCB287320851DCB2876
:1001A0000230A30682200519C62873200519C62827
:1001B0006430A400732005195829A40BDA284030B4
:1001C000A307231BEE281630A50023100A30AC002D
:1001D0007320AC0BE8282314201658291630A500EC
:1001E00023100A30AC007320AC0BF32823140A3020
:1001F000AC007320AC0BF92823100A30AC0073203C
:10020000AC0BFF28231420165829231B2A290B3056
:10021000A50023100A30AC007320AC0B0C2923146A
:100220000A30AC007320AC0B122923100A30AC004A
:100230007320AC0B182923140A30AC007320AC0BCC
:100240001E2923100A30AC007320AC0B2429231480
:10025000201658290B30A50023100A30AC0073205B
:10026000AC0B2F2923140A30AC007320AC0B3529BA
:1002700023100A30AC007320AC0B3B2923140A3046
:10028000AC007320AC0B412923100A30AC00732062
:10029000AC0B472923140A30AC007320AC0B4D295A
:1002A00023100A30AC007320AC0B53292314201602
:1002B000051D58297320851D5829201A61290130F0
:0802C000A30620128220C628CB
:02400E00C430BC
:1042000000000000000000000000000000000700A7
:00000001FF

Cod5 hex

:020000040000FA
:02000000942842
:08000800F0000308F1008C1C5C
:100010000900A01D1128AB0B16280A30AB00A01157
:100020001628AB0B16280A30AB00A01523181C2885
:100030008316051683122328A0190516A01D051284
:10004000831605128312A318292883168516831296
:100050003028A0198516A01D8512831685128312DB
:10006000231836288316051483124D28201D0510E9
:1000700020190514201C4528A10B4D28201083169B
:10008000051483122508A1004D28A20B4D28201429
:100090008316051083122508A200A318532883167F
:1000A000851483126A28201D851020198514A01C30
:1000B0006228A80B6A28A0108316851483122508CD
:1000C000A8006A28A90B6A28A01483168510831239
:1000D0002508A9008C1071088300F00E700E09002D
:1000E0004030A5000800A7010D30A600A70B762818
:1000F000A60B76280800831602309B001C141A08F1
:100100008312080083169A0002309B001C158B1383
:100110008B1B872855309D00AA309D009C149C188D
:100120008F2883128B1708008501A00107309900E2
:1001300083160F30850051309F00043095008113E5
:10014000831201309F001030A600A60BA5289F1433
:100150009F18A82840301E020318201583160C3063
:1001600085009F0183120A30AB003D30A100A8003A
:10017000A200A9007B20A300013092008316FA3070
:1001800092008C1483121215C0308B008519D3286D
:1001900073208519D328851DCB287320851DCB2876
:1001A0000230A30682200519C62873200519C62827
:1001B0006430A40073200519EC28A40BDA28403021
:1001C000A3073D30A50023100A30AC007320AC0B10
:1001D000E62823142016EC28051DEC287320851D25
:1001E000EC28201AF5280130A30620128220C62808
:02400E00C430BC
:1042000000000000000000000000000000000700A7
:00000001FF
Logged

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)
« Reply #1 on: January 25, 2009, 02:27:40 PM »
I took COD5 hex and pasted it into notepad. I saved the file as bull.hex. I then opened up the file in ICprog and pressed the button to view it in assembly. This is what I got:

Quote
; Generated by WinDis84, (c) Nigel Goodwin 1998.

            LIST      P=16F84, F=INHX8M
            include "P16FXX.inc"
            ORG     0x0000

            GOTO    Label_0001
            ORG     0x0004
            MOVWF   0x70
            MOVF    STATUS    , W
            MOVWF   0x71
            BTFSS   0x0C      , 01
            RETFIE
            BTFSS   0x20      , 03
            GOTO    Label_0002
            DECFSZ  0x2B      , f
            GOTO    Label_0003
            MOVLW   0x0A
            MOVWF   0x2B
            BCF     0x20      , 03
            GOTO    Label_0003
Label_0002  DECFSZ  0x2B      , f
            GOTO    Label_0003
            MOVLW   0x0A
            MOVWF   0x2B
            BSF     0x20      , 03
Label_0003  BTFSC   0x23      , 00
            GOTO    Label_0004
            BSF     STATUS    , RP0
            BSF     TRISA     , 04
            BCF     STATUS    , RP0
            GOTO    Label_0005
Label_0004  BTFSC   0x20      , 03
            BSF     PORTA     , 04
            BTFSS   0x20      , 03
            BCF     PORTA     , 04
            BSF     STATUS    , RP0
            BCF     TRISA     , 04
            BCF     STATUS    , RP0
Label_0005  BTFSC   0x23      , 01
            GOTO    Label_0006
            BSF     STATUS    , RP0
            BSF     TRISA     , 05
            BCF     STATUS    , RP0
            GOTO    Label_0007
Label_0006  BTFSC   0x20      , 03
            BSF     PORTA     , 05
            BTFSS   0x20      , 03
            BCF     PORTA     , 05
            BSF     STATUS    , RP0
            BCF     TRISA     , 05
            BCF     STATUS    , RP0
Label_0007  BTFSC   0x23      , 00
            GOTO    Label_0008
            BSF     STATUS    , RP0
            BSF     TRISA     , 00
            BCF     STATUS    , RP0
            GOTO    Label_0009
Label_0008  BTFSS   0x20      , 02
            BCF     PORTA     , 00
            BTFSC   0x20      , 02
            BSF     PORTA     , 00
            BTFSS   0x20      , 00
            GOTO    Label_000A
            DECFSZ  0x21      , f
            GOTO    Label_0009
            BCF     0x20      , 00
            BSF     STATUS    , RP0
            BSF     TRISA     , 00
            BCF     STATUS    , RP0
            MOVF    0x25      , W
            MOVWF   0x21
            GOTO    Label_0009
Label_000A  DECFSZ  0x22      , f
            GOTO    Label_0009
            BSF     0x20      , 00
            BSF     STATUS    , RP0
            BCF     TRISA     , 00
            BCF     STATUS    , RP0
            MOVF    0x25      , W
            MOVWF   0x22
Label_0009  BTFSC   0x23      , 01
            GOTO    Label_000B
            BSF     STATUS    , RP0
            BSF     TRISA     , 01
            BCF     STATUS    , RP0
            GOTO    Label_000C
Label_000B  BTFSS   0x20      , 02
            BCF     PORTA     , 01
            BTFSC   0x20      , 02
            BSF     PORTA     , 01
            BTFSS   0x20      , 01
            GOTO    Label_000D
            DECFSZ  0x28      , f
            GOTO    Label_000C
            BCF     0x20      , 01
            BSF     STATUS    , RP0
            BSF     TRISA     , 01
            BCF     STATUS    , RP0
            MOVF    0x25      , W
            MOVWF   0x28
            GOTO    Label_000C
Label_000D  DECFSZ  0x29      , f
            GOTO    Label_000C
            BSF     0x20      , 01
            BSF     STATUS    , RP0
            BCF     TRISA     , 01
            BCF     STATUS    , RP0
            MOVF    0x25      , W
            MOVWF   0x29
Label_000C  BCF     0x0C      , 01
            MOVF    0x71      , W
            MOVWF   STATUS
            SWAPF   0x70      , f
            SWAPF   0x70      , W
            RETFIE
            MOVLW   0x40
            MOVWF   0x25
            RETURN
Label_0015  CLRF    0x27
            MOVLW   0x0D
            MOVWF   0x26
Label_000E  DECFSZ  0x27      , f
            GOTO    Label_000E
            DECFSZ  0x26      , f
            GOTO    Label_000E
            RETURN
Label_0013  BSF     STATUS    , RP0
            MOVLW   0x02
            MOVWF   0x1B
            BSF     0x1C      , 00
            MOVF    0x1A      , W
            BCF     STATUS    , RP0
            RETURN
Label_0017  BSF     STATUS    , RP0
            MOVWF   0x1A
            MOVLW   0x02
            MOVWF   0x1B
            BSF     0x1C      , 02
Label_000F  BCF     INTCON    , GIE
            BTFSC   INTCON    , GIE
            GOTO    Label_000F
            MOVLW   0x55
            MOVWF   0x1D
            MOVLW   0xAA
            MOVWF   0x1D
            BSF     0x1C      , 01
Label_0010  BTFSC   0x1C      , 01
            GOTO    Label_0010
            BCF     STATUS    , RP0
            BSF     INTCON    , GIE
            RETURN
Label_0001  CLRF    PORTA
            CLRF    0x20
            MOVLW   0x07
            MOVWF   0x19
            BSF     STATUS    , RP0
            MOVLW   0x0F
            MOVWF   TRISA
            MOVLW   0x51
            MOVWF   0x1F
            MOVLW   0x04
            MOVWF   0x15
            BCF     OPTION_REG, NOT_RBPU
            BCF     STATUS    , RP0
            MOVLW   0x01
            MOVWF   0x1F
            MOVLW   0x10
            MOVWF   0x26
Label_0011  DECFSZ  0x26      , f
            GOTO    Label_0011
            BSF     0x1F      , 01
Label_0012  BTFSC   0x1F      , 01
            GOTO    Label_0012
            MOVLW   0x40
            SUBWF   0x1E      , W
            BTFSC   STATUS    , C
            BSF     0x20      , 02
            BSF     STATUS    , RP0
            MOVLW   0x0C
            MOVWF   TRISA
            CLRF    0x1F
            BCF     STATUS    , RP0
            MOVLW   0x0A
            MOVWF   0x2B
            MOVLW   0x3D
            MOVWF   0x21
            MOVWF   0x28
            MOVWF   0x22
            MOVWF   0x29
            CALL    Label_0013
            MOVWF   0x23
            MOVLW   0x01
            MOVWF   0x12
            BSF     STATUS    , RP0
            MOVLW   0xFA
            MOVWF   0x12
            BSF     0x0C      , 01
            BCF     STATUS    , RP0
            BSF     0x12      , 02
            MOVLW   0xC0
            MOVWF   INTCON
Label_0018  BTFSC   PORTA     , 03
            GOTO    Label_0014
            CALL    Label_0015
            BTFSC   PORTA     , 03
            GOTO    Label_0014
Label_0016  BTFSS   PORTA     , 03
            GOTO    Label_0016
            CALL    Label_0015
            BTFSS   PORTA     , 03
            GOTO    Label_0016
            MOVLW   0x02
            XORWF   0x23      , f
            CALL    Label_0017
Label_0014  BTFSC   PORTA     , 02
            GOTO    Label_0018
            CALL    Label_0015
            BTFSC   PORTA     , 02
            GOTO    Label_0018
            MOVLW   0x64
            MOVWF   0x24
Label_001A  CALL    Label_0015
            BTFSC   PORTA     , 02
            GOTO    Label_0019
            DECFSZ  0x24      , f
            GOTO    Label_001A
            MOVLW   0x40
            ADDWF   0x23      , f
            MOVLW   0x3D
            MOVWF   0x25
            BCF     0x23      , 00
            MOVLW   0x0A
            MOVWF   0x2C
Label_001B  CALL    Label_0015
            DECFSZ  0x2C      , f
            GOTO    Label_001B
            BSF     0x23      , 00
            BSF     0x20      , 04
            GOTO    Label_0019
Label_0019  BTFSS   PORTA     , 02
            GOTO    Label_0019
            CALL    Label_0015
            BTFSS   PORTA     , 03
            GOTO    Label_0019
            BTFSC   0x20      , 04
            GOTO    Label_001C
            MOVLW   0x01
            XORWF   0x23      , f
Label_001C  BCF     0x20      , 04
            CALL    Label_0017
            GOTO    Label_0018
 
            ORG     0x2000
            DATA    0x0F
            DATA    0x0F
            DATA    0x0F
            DATA    0x0F
 
            ORG     0x2007
            DATA    0x04
 
            ORG     0x2100
            DATA    0x00
            DATA    0x00
            DATA    0x00
            DATA    0x00
            DATA    0x00
            DATA    0x00
            DATA    0x00
            DATA    0x07

Reached max character, continued in next post -->
Logged
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)
« Reply #2 on: January 25, 2009, 02:28:21 PM »
Compare, line for line with this:

Code: [Select]
;***** VARIABLE DEFINITIONS******************
w_temp        EQU     0x70        ; variable used for context saving
status_temp   EQU     0x71        ; variable used for context saving

FLAGS EQU 0x20 ;software state register
PULSER EQU 0x21 ;pulse on counter
DWELLTIMER EQU 0x22 ;pulse off counter
STATE EQU 0x23 ;programmed state
BUTTONHOLD EQU 0x24
FREQR EQU 0x25 ;frequency value
TEMP1 EQU 0x26
TEMP2 EQU 0x27
PULSEL EQU 0x28
DWELLTIMEL EQU 0x29
TEMP5 EQU 0x2A
LEDBLINK EQU 0x2B
TEMP3 EQU 0x2C



;*******bits in FLAGS register***********
PULSEONR equ 0
PULSEONL equ 1
TRIGOUT equ 2
LEDHI equ 3
STATECHANGE equ 4


;*******bits in STATE register***********
RIGHTACTIVE equ 0
LEFTACTIVE equ 1

;*********GPIO pin names*****************
LEDL equ 5
LEDR equ 4
BUTTONR equ 2
BUTTONL equ 3
TRIGGERR equ 0
TRIGGERL equ 1


;**********Speed settings: change these to change speed (0x05-0xFF)
FIRERATE1 equ 0x2F
FIRERATE2 equ 0x16
FIRERATE3 equ 0x12
FIRERATE4 equ 0x0F



;**********************************************************************
ORG     0x000             ; processor reset vector
goto    main              ; go to beginning of program


ORG     0x004             ; interrupt vector location
movwf   w_temp            ; save off current W register contents
movf STATUS,w          ; move status register into W register
movwf status_temp       ; save off contents of STATUS register

;Take a good note here. OSC is left at default 4MHz.
; We are running at 1MHz instruction cycle, or 1 micro second
;Timer 2 is prescaled 1:4 and compared (PR2) to 250.
; we now have hardware interupt that falls every 1ms exactly
;within limitation of osctune. Main code is inconsequential.
;PULSE and DWELL values control the signals precisely.
;All pulse logic is switched within the few microseconds to
;service the interupt routine. DO NOT modify the ISR
;with any kind of 'wait' or 'loop'. If you want to trigger
; timed events do so by setting an open FLAG bit and have the
;event done in the main loop.


btfss PIR1, TMR2IF ;timer 2 int happened
retfie

;**************** LED blinking *********************************************
;Our main routine will turn the flag bit
;LEDON on or off. The 10ms pulse is a duty cycle
;for the code to work with both CG and
;matrix controllers.

BlinkLed
btfss FLAGS, LEDHI
goto LedLow
decfsz LEDBLINK, f ;if pulse is active, count down 10ms
goto RightLED
movlw 0x0A
movwf LEDBLINK
bcf FLAGS, LEDHI ;10ms done, turn off LEDHI bit
goto RightLED
LedLow
decfsz LEDBLINK, f ;LEDLO time, count down 10ms
goto RightLED
movlw 0x0A
movwf LEDBLINK
bsf FLAGS, LEDHI ;10ms done, turn LEDHI bit on

RightLED
btfsc STATE, RIGHTACTIVE ;is RF on?
goto OutputRightLED
bsf STATUS, RP0 ;bank 1
bsf TRISIO, LEDR ;tristate LED
bcf STATUS, RP0 ;bank 0
goto LeftLED
OutputRightLED
btfsc FLAGS, LEDHI ;if ledhi true,
bsf GPIO, LEDR ;turn output hi
btfss FLAGS, LEDHI ;if ledhi flase,
bcf GPIO, LEDR ;turn led output lo
bsf STATUS, RP0 ;bank 1
bcf TRISIO, LEDR ;turn output on
bcf STATUS, RP0 ;bank 0

LeftLED
btfsc STATE, LEFTACTIVE ;is RF on?
goto OutputleftLED
bsf STATUS, RP0 ;bank 1
bsf TRISIO, LEDL ;tristate LED
bcf STATUS, RP0 ;bank 0
goto RightTrigger
OutputleftLED
btfsc FLAGS, LEDHI ;if ledhi true,
bsf GPIO, LEDL ;turn output hi
btfss FLAGS, LEDHI ;if ledhi flase,
bcf GPIO, LEDL ;turn led output lo
bsf STATUS, RP0 ;bank 1
bcf TRISIO, LEDL ;turn output on
bcf STATUS, RP0 ;bank 0

;**************** Right trigger logic***************************************
RightTrigger
btfsc STATE, RIGHTACTIVE ;is RF on?
goto ActiveR
bsf STATUS, RP0 ;bank 1
bsf TRISIO, TRIGGERR ;output off
bcf STATUS, RP0 ;bank 0
goto LeftTrigger

ActiveR
btfss FLAGS, TRIGOUT ;controllertype
bcf GPIO, TRIGGERR ;determines
btfsc FLAGS, TRIGOUT ;output state
bsf GPIO, TRIGGERR
btfss FLAGS, PULSEONR ;is pulse active?
goto OffstateR
decfsz PULSER, f ;if pulse is active, count down 10ms
goto LeftTrigger
bcf FLAGS, PULSEONR ;10ms is over, clear flags and
bsf STATUS, RP0 ;bank 1
bsf TRISIO, TRIGGERR ;tristate output
bcf STATUS, RP0 ;bank 0
movf FREQR, w ;and reset pulse time.
movwf PULSER
goto LeftTrigger

OffstateR
decfsz DWELLTIMER, f ;count down dwell time to next pulse
goto LeftTrigger
bsf FLAGS, PULSEONR ;if dwell is done turn on outputs
bsf STATUS, RP0 ;bank 1
bcf TRISIO, TRIGGERR ;and reset pulse time
bcf STATUS, RP0 ;bank 0
movf FREQR, w ;from frequency value
movwf DWELLTIMER

LeftTrigger
btfsc STATE, LEFTACTIVE ;is RF on?
goto ActiveL
bsf STATUS, RP0 ;bank 1
bsf TRISIO, TRIGGERL ;output off
bcf STATUS, RP0 ;bank 0
goto EndInterupt

ActiveL
btfss FLAGS, TRIGOUT ;controllertype
bcf GPIO, TRIGGERL ;determines
btfsc FLAGS, TRIGOUT ;output state
bsf GPIO, TRIGGERL
btfss FLAGS, PULSEONL ;is pulse active?
goto OffstateL
decfsz PULSEL, f ;if pulse is active, count down 10ms
goto EndInterupt
bcf FLAGS, PULSEONL ;10ms is over, clear flags and
bsf STATUS, RP0 ;bank 1
bsf TRISIO, TRIGGERL ;tristate output
bcf STATUS, RP0 ;bank 0
movf FREQR, w ;and reset pulse time.
movwf PULSEL
goto EndInterupt

OffstateL
decfsz DWELLTIMEL, f ;count down dwell time to next pulse
goto EndInterupt
bsf FLAGS, PULSEONL ;if dwell is done turn on outputs
bsf STATUS, RP0 ;bank 1
bcf TRISIO, TRIGGERL ;and reset pulse time
bcf STATUS, RP0 ;bank 0
movf FREQR, w ;from frequency value
movwf DWELLTIMEL

EndInterupt
bcf PIR1, TMR2IF

movf    status_temp,w     ; retrieve copy of STATUS register
movwf STATUS            ; restore pre-isr STATUS register contents
swapf   w_temp,f
swapf   w_temp,w          ; restore pre-isr W register contents
retfie                    ; return from interrupt


;*************************************SUBROUTINES**********************************

Wait10ms
clrf TEMP2
movlw 0x0D
movwf TEMP1 ;rough 10ms timer for button debounce.

Loop1
decfsz TEMP2, f ;count down 256*3=768 cycles
goto Loop1
decfsz TEMP1, f ;count down 768*13=9986 cycles
goto Loop1
return

;*************************************************************
ReadEE
bsf     STATUS    , RP0 ;Bank1
movlw 0x02
    movwf   EEADR
    bsf     EECON1    , RD ;start read
    movf    EEDAT    , W
bcf     STATUS    , RP0 ;Bank0
    return
;*************************************************************

WriteEE
bsf     STATUS    , RP0
movwf EEDAT
movlw 0x02
movwf EEADR
bsf EECON1,WREN ;Enable write
bcf INTCON, GIE ;Disable INTs
btfsc INTCON, GIE ;See AN576
goto $-2
movlw 0x55 ;Unlock write
movwf EECON2
movlw 0xAA
movwf EECON2
bsf EECON1, WR ;Start the write
WaitForEEWrite
btfsc   EECON1, WR ;wait for hardware to clear (done writing)
    goto    WaitForEEWrite
bcf     STATUS    , RP0 ;Bank0
bsf INTCON, GIE ;Enable INTS
    return

;**********************************************************************************
;**********************************************************************************
;**********************************************************************************
main

clrf GPIO
clrf FLAGS ;clear outputs and code status register
movlw 0x07
movwf CMCON0 ;comparators off
bsf STATUS, RP0 ;bank 1
movlw 0x0F ;start with 0-3 inputs (ADC read)
movwf TRISIO ;pin 0 & 1 & 5 out, all other inputs
movlw 0x51 ;Fosc/16, pin 0 analog
movwf ANSEL ;Right trigger is analog input
movlw 0x04
movwf WPU ;enable week pullups
bcf OPTION_REG, 7 ;enable all week pullups
bcf STATUS, RP0 ;bank 0

movlw 0x01 ;Left just, Vdd, channel 0
movwf ADCON0 ;module on.
movlw 0x10
movwf TEMP1
Wait4ADC
decfsz TEMP1, f
goto Wait4ADC ;acquisition time
bsf ADCON0, 1 ;start ADC
btfsc ADCON0, 1
goto $-1 ;wait for conversion to be done
movlw 0x40 ;about 0.5V from 2V ref
subwf ADRESH, w ;if f > W, C=1
btfsc STATUS, C ;ie- if trigger > 0.5V, then matrix
bsf FLAGS, TRIGOUT ;matrix config sources (output high)
bsf STATUS, RP0 ;bank 1
movlw 0x0C ;restore pin IO
movwf TRISIO
clrf ANSEL ;all digital now
bcf STATUS, RP0 ;bank 0

movlw 0x0A ;start with 10ms pulse width
movwf LEDBLINK ;for the LEDs
movlw FIRERATE1 ;this will get overwritten,
movwf PULSER ; but start with a default value
movwf PULSEL
movwf DWELLTIMER
movwf DWELLTIMEL
call ReadEE ;get state value
movwf STATE

movlw 0x01
movwf T2CON ;timer 2, prescale 1:4, no postscale
bsf STATUS, RP0 ;bank 1
movlw 0xFA
movwf PR2 ;setup 1ms hardware interupt
bsf PIE1, TMR2IE ;enable timer2 interupt
bcf STATUS, RP0 ;bank 0
bsf T2CON, TMR2ON ;turn on timer2
movlw 0xC0
movwf INTCON ;turn on interupts globally
goto InitState ;get first firerate value

;******MAIN LOOP***************
Start
TestLeft
btfsc GPIO, BUTTONL
goto TestRight ;Test for left button press
call Wait10ms
btfsc GPIO, BUTTONL ;button is down for 10ms
goto TestRight
ReleaseLeft
btfss GPIO, BUTTONL ;wait for button release
goto ReleaseLeft
call Wait10ms
btfss GPIO, BUTTONL ;wait for button release
goto ReleaseLeft

movlw 0x02
xorwf STATE, f ;toggle left trigger
call WriteEE ;store state

TestRight
btfsc GPIO, BUTTONR
goto Start
; goto DisplayState ;Test for right button press
call Wait10ms
btfsc GPIO, BUTTONR ;button is down for min 10ms
goto Start
; goto DisplayState
movlw 0xC8
movwf BUTTONHOLD ;setup for 2 second hold
First2seconds
call Wait10ms
btfsc GPIO, BUTTONR ;button is down for more than 10ms
goto ReleaseRight
decfsz BUTTONHOLD, f
goto First2seconds
movlw 0xC8
movwf BUTTONHOLD ;setup for 2 second hold
Second2seconds
call Wait10ms
btfsc GPIO, BUTTONR
goto ReleaseRight
decfsz BUTTONHOLD, f
goto Second2seconds ;button down for 4 seconds, change firerate

NextState
movlw 0x40
addwf STATE, f ;change firerate state
InitState ;begin test for
btfsc STATE, 7 ;state 1 or 2
goto State3
btfsc STATE, 6
goto State2
State1
movlw FIRERATE1 ;state 1
movwf FREQR
bcf STATE, RIGHTACTIVE ;led off
movlw 0x0A
movwf TEMP3
Loop01
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop01
bsf STATE, RIGHTACTIVE ;led on
bsf FLAGS, STATECHANGE ;notify a state change
goto ReleaseRight

State2
movlw FIRERATE2 ;state 2
movwf FREQR
bcf STATE, RIGHTACTIVE ;blink twice, led off
movlw 0x0A
movwf TEMP3
Loop02
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop02
bsf STATE, RIGHTACTIVE ;led on
movlw 0x0A
movwf TEMP3
Loop03
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop03
bcf STATE, RIGHTACTIVE ;led off
movlw 0x0A
movwf TEMP3
Loop04
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop04
bsf STATE, RIGHTACTIVE ;led on
bsf FLAGS, STATECHANGE ;notify a state change
goto ReleaseRight

State3
btfsc STATE, 6
goto State4
movlw FIRERATE3 ;state 3
movwf FREQR
bcf STATE, RIGHTACTIVE ;blink 3 times, led off
movlw 0x0A
movwf TEMP3
Loop05
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop05
bsf STATE, RIGHTACTIVE ;led on
movlw 0x0A
movwf TEMP3
Loop06
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop06
bcf STATE, RIGHTACTIVE ;led off
movlw 0x0A
movwf TEMP3
Loop07
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop07
bsf STATE, RIGHTACTIVE ;led on
movlw 0x0A
movwf TEMP3
Loop08
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop08
bcf STATE, RIGHTACTIVE ;led off
movlw 0x0A
movwf TEMP3
Loop09
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop09
bsf STATE, RIGHTACTIVE ;led on
bsf FLAGS, STATECHANGE ;notify a state change
goto ReleaseRight

State4
movlw FIRERATE4 ;state 4, 22ms cycle
movwf FREQR
bcf STATE, RIGHTACTIVE ;blink 4 times, led off
movlw 0x0A
movwf TEMP3
Loop10
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop10
bsf STATE, RIGHTACTIVE ;led on
movlw 0x0A
movwf TEMP3
Loop11
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop11
bcf STATE, RIGHTACTIVE ;led off
movlw 0x0A
movwf TEMP3
Loop12
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop12
bsf STATE, RIGHTACTIVE ;led on
movlw 0x0A
movwf TEMP3
Loop13
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop13
bcf STATE, RIGHTACTIVE ;led off
movlw 0x0A
movwf TEMP3
Loop14
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop14
bsf STATE, RIGHTACTIVE ;led on
movlw 0x0A
movwf TEMP3
Loop15
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop15
bcf STATE, RIGHTACTIVE ;led off
movlw 0x0A
movwf TEMP3
Loop16
call Wait10ms ;100 ms
decfsz TEMP3, f
goto Loop16
bsf STATE, RIGHTACTIVE ;led on
bsf FLAGS, STATECHANGE ;notify a state change

ReleaseRight
btfss GPIO, BUTTONR ;wait for button release
goto ReleaseRight
call Wait10ms
btfss GPIO, BUTTONL ;wait for button release
goto ReleaseRight
btfsc FLAGS, STATECHANGE ;test for button tap or state change
goto Continue01
movlw 0x01
xorwf STATE, f ;toggle left trigger if button tap
Continue01
bcf FLAGS, STATECHANGE
call WriteEE ;store state
goto Start





; initialize eeprom locations

ORG 0x2100
DE 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07


END                       ; directive 'end of program'
Logged
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)
« Reply #3 on: January 26, 2009, 07:34:19 AM »
good eye hazer..lol

why post a hex like that anyway??? what are you going to do with it. copy, paste, convert...why go through all that??

if you want a hex tested, please post a link to the hex file, and I will test it for you, otherwise this is usless to me.

besides, hazers code is posted here in full with 4 fire rates to cover all of these games on one chip, yes, thats right 4 modes to cover all the common games  https://www.acidmods.com/forum/index.php?topic=22727.0
« Last Edit: January 26, 2009, 07:36:04 AM by modded matt »
Logged

Offline 802Chives

  • Sargeant at Arms
  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1304
  • Post quality +10/-0
  • Gender: Male
Re: Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)
« Reply #4 on: January 26, 2009, 07:38:07 AM »
wow judgement you must have worked so hard to post those hex codes without crediting the original author.  good thing the original author is here for you to thank him :#1:
Logged

Offline Judgement

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)
« Reply #5 on: January 26, 2009, 11:49:02 AM »
I got these so called hex Codes off of :censored:. But would this coding work? or is it complete BS? Sorry I am kinda new to and this Hex stuff. Modded Matt can you tell me how to convert it in to the proper form?

« Last Edit: January 26, 2009, 11:59:55 AM by Judgement »
Logged

Offline FreeK

  • a-LeeK
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1980
  • Post quality +3/-0
  • Gender: Male
  • Team CYBER for life
Re: Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)
« Reply #6 on: January 26, 2009, 11:55:48 AM »
Quote from: Judgement on January 26, 2009, 11:49:02 AM
I got these so called hex Codes off of :censored

where exactly is that again?
Logged

Offline Judgement

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)
« Reply #7 on: January 26, 2009, 12:17:39 PM »
Spark
Logged

Offline Judgement

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: Hex codes Cod4 Cod5 and H3 For PIC- 12F683 (8 pin) hopefully they work :)
« Reply #8 on: January 26, 2009, 12:18:45 PM »
mods  I had to post separate due to the "censored" lmao
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal